We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1m Mini SAS HD SFF8643 to four SATA 7pin male breakout cable

SMUGDESK

SMUGDESK 1m Mini SAS HD SFF8643 to 4×SATA 7Pin Male Cable 12Gbps 30AWG Black

SKU CH-T7ZV-NEMQP

Converts a Mini SAS HD SFF8643 port into four SATA connectors for 12Gbps multidrive server storage

  • Converts one SFF8643 port into four SATA drives
  • 12Gbps bandwidth handles RAID and enterprise storage workloads
  • 30AWG copper wire keeps signals clean over distance
  • One metre length fits standard rackmount server layouts
  • Shielded black construction cuts electromagnetic interference in dense chassis

Mini SAS HD breakout cable

This 1 metre breakout cable converts a single Mini SAS HD SFF8643 port into four SATA 7pin male connectors. It is designed for administrators building multidrive arrays inside rackmount servers, large chassis or highcapacity NAS enclosures. The 12Gbps bandwidth supports fast data throughput for RAID controllers and enterprise storage backplanes.

12Gbps SAS SATA bandwidth

The cable is rated for 12Gbps transmission across both SAS and SATA protocols. That single speed figure determines whether the link can saturate modern enterprise drives and RAID controllers without becoming a bottleneck. Verify that your controller and backplane also operate at 12Gbps to avoid negotiating down to a lower rate.

30AWG copper shielded construction

Premium 30AWG pure copper conductors and servergrade shielding reduce signal loss and electromagnetic interference in dense chassis. The black jacket suits standard rackmount cable management and mediumdistance internal routing. The breakout design frees up a single controller port for four drives, simplifying cabling in storageheavy builds.

Highlights

  • Converts one SFF8643 port into four SATA drives
  • 12Gbps bandwidth handles RAID and enterprise storage workloads
  • 30AWG copper wire keeps signals clean over distance
  • One metre length fits standard rackmount server layouts
  • Shielded black construction cuts electromagnetic interference in dense chassis

Specifications

No published specifications for this item yet.

Questions about this item

What does the 12Gbps rating mean when the cable is installed in a server?

It lets each SATA drive run at its full 12Gbps SAS/SATA link speed so RAID controllers and backplanes can push maximum throughput to every connected disk.

Which interface standard does the SFF8643 end use and what does it limit?

The SFF8643 Mini SAS HD connector follows the SAS 12Gbps spec, so the four SATA ports are capped at 12Gbps per lane.

What clearance and mounting points does the 1m cable need inside a chassis?

It needs room for a single Mini SAS HD plug and four SATA 7-pin plugs plus 1m of 30AWG cable routing space.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.