We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
One-metre Mini SAS HD cable with SFF-8643 plug fanning out to SFF-8482 29-pin connector and SATA power lead

SMUGDESK

SMUGDESK 1M Mini SAS HD SFF-8643 to SFF-8482 29Pin Breakout Cable with SATA Power

SKU CH-SVED-RZFDF

Connects a Mini SAS HD RAID controller to 2.5 or 3.5 SAS drives with integrated SATA power for simpler server wiring

  • Connect RAID controllers directly to SAS drives via SFF-8643 to SFF-8482 29Pin breakout
  • Integrated SATA power port supplies HDD power without separate cables for cleaner builds
  • Shielded construction reduces electromagnetic interference for stable 24/7 server operation
  • Precision-molded locking latches maintain firm contact under continuous vibration
  • 1-meter length provides routing flexibility for standard rack servers and storage enclosures

SAS RAID breakout cable with SATA power

This 1-metre Mini SAS HD SFF-8643 to SFF-8482 29Pin breakout cable connects RAID controllers to 2.5 or 3.5 SAS hard drives. An integrated SATA power port supplies the drive directly, removing the need for a separate power lead. Precision-moulded connectors with locking latches maintain firm contact under continuous server operation.

Replaces separate data and power runs

The single assembly combines data transmission and power delivery, simplifying internal routing in rack servers, workstations and storage enclosures. The jump is worthwhile when chassis space is limited or when vibration-prone environments demand a locked, one-piece link between controller and drive.

Shielded for sustained 24/7 workloads

High-performance shielding minimises electromagnetic interference from power supplies, motherboards and add-in cards during heavy, continuous I/O. Secure lock buckles prevent signal interruption caused by vibration, keeping the connection stable over long periods rather than just in short bursts.

Highlights

  • Connect RAID controllers directly to SAS drives via SFF-8643 to SFF-8482 29Pin breakout
  • Integrated SATA power port supplies HDD power without separate cables for cleaner builds
  • Shielded construction reduces electromagnetic interference for stable 24/7 server operation
  • Precision-molded locking latches maintain firm contact under continuous vibration
  • 1-meter length provides routing flexibility for standard rack servers and storage enclosures

Specifications

No published specifications for this item yet.

Questions about this item

What connector fits the SFF-8643 port on my RAID controller?

The cable uses a Mini SAS HD SFF-8643 plug that locks into the controller port with a secure latch.

How do I connect the SATA power lead without bending the pins?

Align the integrated SATA power connector with the drive’s power socket and press straight in until the latch clicks.

When should I replace the SFF-8482 29Pin ends if drives drop out?

Inspect the latch tabs and gold contacts; swap the cable if tabs are cracked or contacts show wear from repeated insertion.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.