SMUGDESK
SMUGDESK 1FT C14 Male to C13 Female + NEMA 515R Y-Splitter Power Cord
A 1-foot Y-splitter converts one IEC C14 input into a C13 female port and a NEMA 515R outlet for dual-device power distribution in racks
- Splits one C14 inlet into C13 and NEMA 5-15R outlets
- Tinned copper conductors deliver stable AC power under continuous load
- Overmolded connectors with strain relief prevent wire fracture
- Compact 1-foot length reduces cable clutter inside dense racks
- Plug-and-play design suits PDU, UPS and rackmount deployments
Purpose-built rack power splitter
This 1-foot Y-splitter converts a single IEC C14 male inlet into one C13 female port and one NEMA 515R three-prong outlet. It lets you run an IEC-equipped server or network device alongside a standard US plug appliance from one PDU or UPS outlet. The design targets dense rack cabinets where port count and space are tight.
Dual-output flexibility without extra strips
The cable adds a standard US AC receptacle next to the C13 connector so a monitor, charger or peripheral can share the same upstream circuit. Tinned copper conductors keep resistance low during continuous load, while overmolded strain relief protects the junctions from vibration and repeated mating cycles inside a cabinet.
Plug-and-play in tight enclosures
The 1-foot length removes slack that blocks airflow and complicates cable management. Secure, tight-fitting contacts reduce the chance of intermittent power loss from loose plugs. Installers should verify that the combined draw of both connected devices stays within the upstream C14 circuit rating.
Highlights
- Splits one C14 inlet into C13 and NEMA 5-15R outlets
- Tinned copper conductors deliver stable AC power under continuous load
- Overmolded connectors with strain relief prevent wire fracture
- Compact 1-foot length reduces cable clutter inside dense racks
- Plug-and-play design suits PDU, UPS and rackmount deployments
Specifications
No published specifications for this item yet.
Questions about this item
Will the C13 or NEMA 515R connectors need periodic replacement?
The reinforced overmolded housing and integrated strain relief at each junction protect the internal tinned copper wires from pulling stress and repeated plug cycles, so connector wear is minimised under normal rack use.
What is the first limit reached during sustained load on the Y splitter?
The single C14 male input carries the combined current of both the C13 female and NEMA 515R outputs, so the input plug rating becomes the bottleneck before either individual output reaches its own limit.
Does the cable generate noticeable heat or noise when powering equipment all day?
High conductivity tinned copper cores reduce resistance and heat build up during continuous operation, and the passive cord produces no audible noise while running.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115402BTC
In stock
