We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short Y-splitter cable with C14 plug branching to C13 and 515R sockets

SMUGDESK

SMUGDESK 1FT C14 Male to C13 + 515R YSplitter Power Splitter Cord

SKU CH-PBWV-QVVXR

A 1 ft Y-splitter cable connects one C14 inlet to both a C13 outlet and a 515R socket for dual-device power in tight rack spaces

  • Powers two devices from one C14 inlet
  • C13 IEC and NEMA 515R outputs for mixed equipment
  • 1‑foot length keeps rack wiring tidy
  • Heavy‑duty copper conductors handle continuous load
  • Plug‑and‑play with no assembly required

Compact Y-Splitter for Mixed Outlets

This one-foot cable splits a single C14 inlet into a C13 IEC socket and a NEMA 515R receptacle. It lets rack-mounted servers, UPS units and industrial gear share one power source without extra PDU ports. The short length keeps cable runs tidy inside dense cabinets. Builders needing only C13 or only 515R connections should choose a straight cord instead.

Continuous Load Stability

Heavy-gauge copper conductors and a flame-retardant jacket maintain steady AC delivery during non-stop operation. The assembly is rated for the combined draw of both attached devices, so total load must stay within the cable's limit. Overloading risks overheating and tripping upstream protection. Installations requiring longer reach or higher per-outlet ratings need a different power distribution solution.

Dual-Interface Compatibility

The defining spec is the Y-split from C14 male to both C13 and 515R female ends. This exact pairing decides whether the cord matches your equipment's inlet mix. If your rack uses only IEC or only NEMA inlets, this splitter adds an unused connector. Verify both outlet types are present before ordering.

Highlights

  • Powers two devices from one C14 inlet
  • C13 IEC and NEMA 515R outputs for mixed equipment
  • 1‑foot length keeps rack wiring tidy
  • Heavy‑duty copper conductors handle continuous load
  • Plug‑and‑play with no assembly required

Specifications

No published specifications for this item yet.

Questions about this item

Will the 14 C14 input and 13 C13 plus 515 NEMA outputs run warm when powering a server and a peripheral continuously?

The heavy-gauge copper conductors and flame-retardant jacket are built for stable AC transmission under continuous load, so heat stays minimal when total draw remains within the cable's rated capacity.

My UPS only has a C13 outlet — what do I need on the UPS side to use this splitter?

You need a C14 inlet on the power source; this splitter's input is a C14 male plug, so it connects directly to a C13 female outlet on your UPS or PDU.

Can I keep my older IEC C13 server supply and a legacy NEMA 5-15 device on the same 14 C14 feed without adapters?

Yes, the Y-splitter provides one C13 female and one 515 NEMA receptacle from a single C14 male, letting both interface types draw power simultaneously.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.