We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
19.68 inch Mini SAS HD SFF8643 breakout cable to four SFF8482 connectors with 15 pin power port

SMUGDESK

SMUGDESK 19.68in Mini SAS HD SFF8643 to 4× SFF8482 29Pin with 15Pin Power Cable

SKU CH-X88C-1JAK5

Converts a Mini SAS HD SFF8643 connector into four SFF8482 ports with a 15pin SAS power port for multidrive server and NAS storage expansion

  • Connect four drives from one Mini SAS HD SFF8643 port
  • Integrated 15pin SAS power connector supplies stable power
  • 68inch compact length keeps internal routing tidy
  • Highspeed shielded construction reduces interference for RAID arrays
  • Servergrade durability suits data center backplanes and multidrive expansion

Connector Breakout

This cable converts a single Mini SAS HD SFF8643 host port into four 29pin SFF8482 connectors. It enables direct attachment of up to four SAS or SATA hard drives from one controller lane. The integrated 15pin SAS power port supplies drive power through the same assembly, reducing internal cable count. It is built for enterprise server, NAS and RAID storage expansion.

Length Constraint

The fixed 19.68inch length suits compact chassis and smallformfactor systems where longer cables would obstruct airflow or exceed routing space. Builders needing extended reach across fullsize rack enclosures or external JBOD cabinets cannot use this assembly. The short run also limits flexibility for rear backplane connections in deep server nodes.

Port Compatibility

The SFF8482 29pin connectors accept only SAS or SATA drives with matching ports. Drives requiring U.2, U.3 or other form factors will not connect without a separate adapter not included here. Verify each drive carries the 29pin interface before purchase.

Highlights

  • Connect four drives from one Mini SAS HD SFF8643 port
  • Integrated 15pin SAS power connector supplies stable power
  • 68inch compact length keeps internal routing tidy
  • Highspeed shielded construction reduces interference for RAID arrays
  • Servergrade durability suits data center backplanes and multidrive expansion

Specifications

No published specifications for this item yet.

Questions about this item

Should I use the four 29-pin SFF-8482 connectors or the single SFF-8643 end for my backplane?

The SFF-8643 end plugs into your host controller or RAID card, while the four SFF-8482 connectors attach to individual SAS or SATA drives on the backplane.

What does the integrated 15-pin power port actually do for my drives?

It supplies power directly to the connected drives through the same cable assembly, removing the need for separate power leads from the PSU to each drive bay.

Which SAS standard does the SFF-8643 interface limit my array to?

The SFF-8643 connector supports the SAS protocol used by your controller; the cable itself is passive shielding and does not impose a speed ceiling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.