SMUGDESK
SMUGDESK 15-Pin SATA Male to 6-Pin Slimline SATA Sleeved Power Adapter Cable 20 Inches 2 Pack
Two sleeved cables convert a 15-pin SATA power connector to a 6-pin Slimline SATA interface for slim optical drives, measuring 20 inches for flexible routing inside PC cases
- Converts standard SATA power to 6-pin Slimline for slim optical drives
- Sleeved jacket reduces cable tangling and improves internal chassis airflow
- 20-inch length allows flexible routing inside small and full-tower cases
- Stable power delivery prevents drive recognition issues from poor contact
- Two-cable pack provides a spare for upgrades or replacement needs
Dual-cable adapter kit
This two-pack provides a pair of 15-pin SATA male to 6-pin Slimline SATA power adapters. It targets builders upgrading or replacing slim optical drives in desktops, all-in-one PCs or compact storage enclosures. Each cord bridges a standard power supply connector to the specialised slimline interface. No drivers or configuration are required for installation.
Thermal and power profile
The sleeved jacket keeps wires organised, reducing airflow obstruction inside the chassis. Steady power delivery minimises the chance of unstable drive recognition caused by poor contact or voltage drop. Passive construction adds no fan noise and draws no extra power beyond the drive itself. The 20-inch length prevents connector strain during routing.
Build and mounting implications
Sleeved outer cover resists tangling and simplifies cable management in small form factor and full-size cases alike. Direct plug-and-play mating ensures a secure fit without adapters or tools. The pair gives a ready spare for multi-drive builds or future maintenance. Connectors are sized only for the stated slimline SATA optical drives.
Highlights
- Converts standard SATA power to 6-pin Slimline for slim optical drives
- Sleeved jacket reduces cable tangling and improves internal chassis airflow
- 20-inch length allows flexible routing inside small and full-tower cases
- Stable power delivery prevents drive recognition issues from poor contact
- Two-cable pack provides a spare for upgrades or replacement needs
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the 15-pin SATA male to 6-pin Slimline SATA cable without bending the connector?
Plug the 15-pin end into the power supply SATA connector, then align the 6-pin Slimline end with the slim optical drive port. Insert straight without forcing; the 20-inch sleeved length lets you route slack first so no strain pulls the pins out of line.
What maintenance will the 15-pin SATA to 6-pin Slimline SATA adapter need over time?
No scheduled maintenance is required. Periodically check that the sleeved jacket has not been cut by sharp case edges and that both connectors remain fully seated; re-seat if a drive shows intermittent power.
What limit appears first on the 15-pin SATA to 6-pin Slimline SATA cable during sustained use?
The 20-inch length is the practical limit; routing farther than that adds tension that can unseat the 6-pin Slimline connector and interrupt power to the slim optical drive.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



