We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black cable with a SATA male plug splitting into two female connectors

SMUGDESK

SMUGDESK 15 Pin SATA 1-to-2 Power Splitter Cord 22cm 8.6 Inch

SKU CH-VQXX-KVFPN

A 22 cm SATA 1-to-2 power splitter that turns one 15-pin male connector into two female ports for adding drives

  • One cable powers two SATA drives
  • 22 cm length keeps internal wiring tidy
  • 15-pin male to dual female split
  • Copper conductors minimise voltage drop
  • Tool-free plug-and-play installation

SATA Power Splitter for Two Drives

This 22 cm cable splits one 15 pin SATA male connector into two female ports, letting you power a pair of SATA hard drives or SSDs from a single power supply outlet. It is aimed at desktop builders who need an extra power connection without adding a new PSU cable. The short length keeps internal routing tidy in compact cases.

Tool-Free Plug-In With Locking Connectors

Installation is a simple push-fit onto the existing SATA power lead and the two drives; no tools or adapters are required. Firm locking tabs on each connector resist accidental unplugging caused by case vibration. The only common issue is exceeding the power supply’s total output when multiple high-draw drives spin up together.

Limited By Single Rail Current

Both drives share the same 15 pin feed, so the combined current draw must stay within what that one rail can deliver. The 22 cm reach restricts placement to drives mounted close to each other and the PSU. Builders needing longer runs or independent power rails will need a different cable solution.

Highlights

  • One cable powers two SATA drives
  • 22 cm length keeps internal wiring tidy
  • 15-pin male to dual female split
  • Copper conductors minimise voltage drop
  • Tool-free plug-and-play installation

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the splitter is delivering stable power to both drives after installation?

Check that both connected SATA drives spin up and appear in the BIOS or operating system without errors, confirming the copper conductors are providing steady power.

What connectors are included on the cable and do I need any extra adapters?

The cord has one 15-pin SATA male plug and two 15-pin SATA female sockets; no additional adapters are required for standard SATA drives.

Which version of this splitter should I choose for a desktop with two SATA hard drives?

This single 22 cm 1-to-2 model is the only version listed and supports powering two SATA devices from one power supply outlet.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.