SMUGDESK
SMUGDESK 10Pack 2.5" SSD Tray Caddy P22892 HP Gen10 Gen10 Plus V2 Gen11 Servers
Ten metal trays hold 2.5″ SATA or NVMe drives and match OEM part 22892 for HP Gen10, Gen10 Plus V2 and Gen11 servers DL20, DL360, DL365, DL380, DL385 and DL325
- 10-piece bulk pack enables cost-effective server storage expansion
- OEM part numbers P22892 and P22892002 guarantee exact hardware compatibility
- Supports 2.5" SATA and NVMe SSDs for high-speed enterprise storage
- High-strength metal construction secures drives and optimises heat dissipation
- Plug-and-play design allows tool-free installation in data centres
Ten-Pack 2.5" Server Drive Caddy
This ten-pack of 2.5-inch drive trays matches OEM part numbers P22892 and P22892002 for HP ProLiant Gen10, Gen10 Plus V2 and Gen11 servers. It supports both SATA and NVMe solid-state drives and hard disk drives. Durable metal construction secures each drive and aids heat dissipation. The bulk quantity suits batch storage expansion or replacement across multiple systems.
Verify Server Model and Drive Interface
Confirm the target server is a DL20, DL360, DL365, DL380, DL385 or DL325 from the supported generations. Ensure each 2.5-inch drive uses a SATA or NVMe interface that the server backplane accepts. Check that the drive thickness matches the tray opening and that the chassis has enough free bays for the quantity you plan to install.
Plug-and-Play Integration into Supported Chassis
The trays slide directly into the hot-swap bays of compatible ProLiant servers without tools, freeing administrators from cable routing or bracket assembly. Metal frames transfer drive heat into the chassis airflow path, maintaining thermal limits during sustained workloads. Each caddy locks securely, preventing vibration-induced disconnects in dense rack environments.
Highlights
- 10-piece bulk pack enables cost-effective server storage expansion
- OEM part numbers P22892 and P22892002 guarantee exact hardware compatibility
- Supports 2.5" SATA and NVMe SSDs for high-speed enterprise storage
- High-strength metal construction secures drives and optimises heat dissipation
- Plug-and-play design allows tool-free installation in data centres
Specifications
No published specifications for this item yet.
Questions about this item
Does the 10-pack include the 2.5" SATA or NVMe drives themselves?
The pack contains ten empty trays with part numbers P22892 and P22892002; the SATA and NVMe drives must be purchased separately.
Which tray version matches a DL380 Gen10 Plus V2 server?
The caddies carry OEM part numbers P22892 and P22892002, validated for DL380 across Gen10, Gen10 Plus V2 and Gen11 platforms.
Will a 2.5" NVMe SSD run at full PCIe speed when mounted in this tray?
The tray provides the mechanical and electrical pass-through for NVMe drives, so the SSD operates at its rated PCIe speed inside supported HP servers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
