We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

SMUGDESK

SMUGDESK 1080P HDMI to RJ45 Extender Kit 60M

SKU CH-EY5P-EEZKY

Transmits 1080P video up to 60 meters over a single CAT5E or CAT6 cable with included sender, receiver and US power adapters

  • Transmits 1080P FHD video up to 60 metres over standard CAT5E or CAT6 cable
  • Replaces costly long HDMI runs with a single affordable ethernet cable
  • Complete sender and receiver pair ships with US power adapters for stable operation
  • Plug-and-play setup requires no extra drivers or software installation
  • Works with PCs, laptops, TVs, projectors and other HDMI display devices

Signal Reach & Resolution

This SMUGDESK extender kit sends 1080P full-HD video up to 60 meters over a single CAT5E or CAT6 cable. It replaces long, costly HDMI runs for TVs, projectors, monitors or surveillance displays in homes, offices and commercial installs. The box contains one sender and one receiver so the link works out of the box. No software or drivers are required for operation.

Wiring & Power

Each unit connects through an RJ45 jack, letting you use standard Ethernet cabling that is cheaper and easier to pull than HDMI. A US-plug power adapter is included for stable supply to both ends. Qualified, intact CAT5E or CAT6 cable is needed to reach the full distance. The plug-and-play design means you simply link source, cable and display.

Thermals, Noise & Power

The compact sender and receiver units run passively with no fans, so they add no audible noise to the room. Power draw is low enough to be handled by the supplied adapters without extra cooling. Normal use stays cool to the touch even during continuous 1080P transmission. No active thermal management is required.

Highlights

  • Transmits 1080P FHD video up to 60 metres over standard CAT5E or CAT6 cable
  • Replaces costly long HDMI runs with a single affordable ethernet cable
  • Complete sender and receiver pair ships with US power adapters for stable operation
  • Plug-and-play setup requires no extra drivers or software installation
  • Works with PCs, laptops, TVs, projectors and other HDMI display devices

Specifications

No published specifications for this item yet.

Questions about this item

What resolution and distance does the HDMI-to-RJ45 extender support over CAT5E or CAT6 cable?

The kit transmits full 1080P FHD video up to 60 meters using a single CAT5E or CAT6 network cable between sender and receiver.

What physical connections and power does the sender and receiver require?

Each unit has an HDMI port and an RJ45 jack; both units need the included US-plug power adapters connected for stable operation.

How is the extender set up and what common step should be avoided?

Connect source to sender, run CAT5E/CAT6 cable to receiver, attach display, then power both units — do not skip powering both sender and receiver.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.