We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
100cm Slimline SAS 4.0 SFF-8654 38-pin to four SFF-8482 29-pin fan-out cable

SMUGDESK

SMUGDESK 100cm SAS 4.0 SFF8654 38pin to 4 SFF8482 29pin FanOut Cable

SKU CH-T95R-W0K04

Connects one SFF8654 38pin SAS 4.0 host port to four SFF8482 29pin SAS drives with a 100cm fanout cable for RAID arrays

  • Converts one SFF-8654 host port into four SFF-8482 drive ports
  • 100 cm length allows flexible routing inside large rackmount enclosures
  • SAS 4.0 compliant design delivers stable high-bandwidth data transmission
  • Optimised for RAID controllers to expand multi-drive server storage
  • Robust server-grade build ensures reliable long-term data-centre operation

Product Identity

This SMUGDESK cable is a 1-to-4 fan-out splitter that converts a single SFF8654 38-pin Slimline SAS 4.0 host port into four SFF8482 29-pin SAS target ports. It is built for administrators and integrators expanding drive counts on RAID controllers inside rackmount servers and storage enclosures. The 100cm length supports flexible routing in dense chassis.

Who It Suits

It suits builders connecting up to four SAS hard disks to one modern Slimline SAS 4.0 RAID adapter in enterprise or data-centre deployments. It is not for installations where the host side uses a different connector type or where fewer than four target ports are required. Systems lacking an SFF8654 4-lane host interface cannot use this cable.

Deciding Specification

The host connector is an SFF8654 38-pin Slimline SAS 4.0 4-lane port; the four drive connectors are SFF8482 29-pin SAS ports. Verify that your RAID controller presents exactly this host interface and that your drives or backplanes accept the SFF8482 attachment before ordering.

Highlights

  • Converts one SFF-8654 host port into four SFF-8482 drive ports
  • 100 cm length allows flexible routing inside large rackmount enclosures
  • SAS 4.0 compliant design delivers stable high-bandwidth data transmission
  • Optimised for RAID controllers to expand multi-drive server storage
  • Robust server-grade build ensures reliable long-term data-centre operation

Specifications

No published specifications for this item yet.

Questions about this item

What bandwidth does the Slimline SAS 4.0 SFF8654 38pin host interface cap at in practice?

The SFF8654 38pin host port follows the SAS 4.0 specification, providing four lanes of highspeed data transmission for stable multidrive connectivity.

What physical clearance does the 100cm fanout cable need inside a rackmount server?

The 100cm length allows flexible routing between the RAID controller and four SFF8482 29pin drive bays in large enclosures.

How is the 1to4 splitter installed, and which step do builders often miss?

Connect the single SFF8654 38pin plug to the RAID host port, then attach each of the four SFF8482 29pin connectors to the target drives, ensuring every latch clicks securely.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.