We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 100cm SATA cable with one straight end and six 90-degree right-angle connectors

SMUGDESK

SMUGDESK 100cm 6 Port SATA 7Pin to 6 Port 90° Right Angle Cable

SKU CH-EM8S-JT2NZ

Connects six SATA drives with a 100cm cable featuring straight and 90° right-angle plugs for tight spaces

  • 100 cm length reaches drives across full-size chassis
  • 90° right-angle plugs fit tight drive bays without bending cables
  • Six independent channels deliver stable power and data to multiple drives
  • Shielded wiring cuts electromagnetic crosstalk inside the case
  • Flexible PVC jacket resists pulling and high internal temperatures

SATA 7-pin 6-port cable for multi-drive builds

This 100cm SATA 7-pin cable splits one straight connector into six 90-degree right-angle ports. It lets builders attach multiple HDDs or SSDs inside desktop PCs, storage workstations or small servers where drive brackets sit close to the motherboard edge. The parallel wiring keeps each drive on an independent channel for reliable detection.

Right-angle plugs reduce cable strain

The 90-degree elbows sit flat against drive ports so cables do not bend sharply behind crowded backplanes. A flexible PVC jacket resists pulling and long-term chassis heat while the bundled layout keeps the interior tidy. High-quality shielding cuts electromagnetic crosstalk that can cause data errors or drive drop-outs.

Independent channels and shielding protect data

Six separate wire groups maintain stable impedance across every connected drive. The shielded construction blocks internal EMI from fans or power leads so large arrays stay recognised under load. The neat harness simplifies routing in NAS boxes, industrial PCs or any DIY build that needs clean, high-density SATA connectivity.

Highlights

  • 100 cm length reaches drives across full-size chassis
  • 90° right-angle plugs fit tight drive bays without bending cables
  • Six independent channels deliver stable power and data to multiple drives
  • Shielded wiring cuts electromagnetic crosstalk inside the case
  • Flexible PVC jacket resists pulling and high internal temperatures

Specifications

No published specifications for this item yet.

Questions about this item

How do I route the 100cm cable so the 90° SATA plugs seat fully without stressing the drive ports?

Run the straight end from the motherboard or controller along the case floor, then bend each right-angle tail upward or downward into its drive bay; the 100cm length lets you keep slack before the 90° bend so the connector seats squarely without pulling sideways on the port.

Will the PVC sleeve or the parallel wiring need replacement after long-term heat inside the chassis?

The flexible PVC jacket is rated for continuous high-temperature operation inside a PC case and the six independent shielded wires are soldered at both ends, so no user-serviceable parts wear out under normal desktop or server duty cycles.

At what point does signal integrity degrade when all six drives run sustained transfers?

Each of the six channels uses its own shielded 7-pin pair within the 100cm run, maintaining stable impedance up to the SATA specification limit; the first bottleneck will be the host controller or drive throughput, not the cable itself.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.