SMUGDESK
SMUGDESK 1 to 3 SATA Power Splitter Cord 42cm 16.5inch
A 15-pin SATA male connector splits into three female ports to power multiple drives from one supply
- Powers three drives from one SATA connector
- 42 cm length enables tidy internal routing
- Locking plugs prevent accidental disconnection
- Steady current delivery keeps storage stable
- Works with HDDs, SSDs and optical drives
SMUGDESK 1-to-3 SATA Power Splitter
This 15-pin SATA male-to-female splitter expands a single power connector into three outputs. It is designed for builders adding multiple hard drives, solid-state drives or optical drives to a desktop or server chassis. The cable suits DIY assembly, hardware upgrades and storage expansion projects.
Splitter Length and Reach
The cord measures 42 centimetres or 16.5 inches end to end. This length determines whether the three branches can reach every drive bay in your case without strain or slack. Verify the distance from your power supply to the furthest device before ordering.
Locking Connectors and Routing
Each female port features a lockable SATA connector that resists vibration and accidental disconnection. The flexible wiring allows tidy routing behind motherboard trays or along case channels. Ensure the 15-pin orientation matches your power supply cables; reversed insertion will prevent the latch from engaging.
Highlights
- Powers three drives from one SATA connector
- 42 cm length enables tidy internal routing
- Locking plugs prevent accidental disconnection
- Steady current delivery keeps storage stable
- Works with HDDs, SSDs and optical drives
Specifications
No published specifications for this item yet.
Questions about this item
How many drives can one SATA power plug actually run with this splitter?
One 15-pin SATA male connector feeds three SATA female ports, so you can power three hard drives, SSDs or optical drives from a single PSU lead.
What does the 15-pin SATA interface limit in real use?
The 15-pin SATA connector carries only power, so the splitter adds extra drive connectors but cannot increase the PSU’s total wattage or current on that rail.
Will the 42 cm length reach drives mounted at the bottom of a full-tower case?
At 42 cm (16.5 inch) the cable spans most mid-tower layouts; measure your PSU-to-drive-bay distance to confirm it covers your specific build.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



