We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SMUGDESK optical audio splitter with integrated cables, one Toslink input branching to two Toslink outputs

SMUGDESK

SMUGDESK 1-in 2-out Toslink SPDIF Optical Audio Splitter Cable

SKU CH-Z0EK-R9YWR

Splits one optical audio source into two identical outputs for simultaneous connection to soundbars, speakers or amplifiers without an external power supply

  • Splits one optical source to two devices simultaneously
  • Pass-through PCM stereo audio without compression
  • Integrated cable needs no external power adapter
  • Compact form fits behind TV cabinets easily
  • Mirrors audio to soundbars, amps or speakers

One-Input Two-Output Optical Splitter

This SMUGDESP optical splitter duplicates a single Toslink SPDIF source to two separate audio devices at the same time. It handles uncompressed PCM stereo signals for televisions, game consoles, soundbars, amplifiers and speakers. The integrated cable design needs no external power supply and works immediately after plugging in. Its compact form fits easily behind cabinets or equipment racks.

Passive Plug-and-Play Operation

Because the unit draws power from the optical signal itself, there is no power adapter to connect and no driver or software to install. The splitter simply mirrors the incoming PCM stereo stream to both outputs, letting you run a soundbar and an amplifier together without swapping cables. Encrypted surround formats such as Dolby Atmos or DTS are not supported, so only standard stereo PCM audio passes through.

Check Source and Device Compatibility

Verify that your source device can output PCM stereo over its Toslink port, as the splitter cannot decode compressed or multi-channel bitstreams. Ensure both target devices accept an optical input and are set to the same PCM sample rate. The fixed cable lengths on the unit may limit placement, so measure the distance from source to each destination before ordering.

Highlights

  • Splits one optical source to two devices simultaneously
  • Pass-through PCM stereo audio without compression
  • Integrated cable needs no external power adapter
  • Compact form fits behind TV cabinets easily
  • Mirrors audio to soundbars, amps or speakers

Specifications

No published specifications for this item yet.

Questions about this item

Does the integrated Toslink cable ever need replacing?

The splitter uses a fixed integrated cable design, so the cable itself is not user-replaceable; if it becomes damaged the whole unit would need to be swapped.

What audio format limits the splitter under sustained use?

It only passes uncompressed PCM stereo; Dolby Atmos, DTS and other encrypted surround formats are not supported and will not pass through.

Does the unit draw power or generate heat when running continuously?

No external power supply is required and the passive optical design produces no measurable heat or fan noise during all-day operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.