We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with 1.8 inch Micro SATA female port and 44 pin IDE male header

SMUGDESK

SMUGDESK 1.8 Inch Micro SATA 7+9 Pin Female to IDE 44 Pin Male PCBA Hard Drive Adapter

SKU CH-T7W8-YDNDZ

Converts a 1.8 inch Micro SATA drive to a 44 pin IDE interface for legacy laptops and industrial equipment

  • Connect 1.8″ Micro SATA drives to legacy IDE 44‑pin systems
  • Compact PCBA board keeps signal paths short for reliable data transfer
  • Use slim Micro SATA HDDs in older laptops and industrial gear
  • Plug‑and‑play with legacy Windows and embedded hardware
  • Adapts 7+9‑pin female Micro SATA to standard IDE 44‑pin male header

Micro SATA to IDE Adapter

This PCBA adapter converts a 1.8 inch Micro SATA 7+9 pin female interface to a standard IDE 44 pin male header. It enables 1.8 inch Micro SATA hard disk drives to connect with legacy IDE based laptops and industrial devices. The plug and play design works with older Windows systems and embedded hardware for data migration or retro upgrades.

Compact PCBA Board Design

The compact circuit board construction provides stable signal transmission between the drive and host system. Its small form factor fits inside tight notebook bays and industrial enclosures without extra cabling. The direct header connection reduces signal loss and simplifies installation in space constrained legacy equipment.

Passive Operation Characteristics

The adapter draws no external power and adds negligible load to the IDE bus during normal use. With no active components or moving parts it operates silently and generates no measurable heat. Reliability depends on the host system's IDE power delivery and the condition of the connected Micro SATA drive.

Highlights

  • Connect 1.8″ Micro SATA drives to legacy IDE 44‑pin systems
  • Compact PCBA board keeps signal paths short for reliable data transfer
  • Use slim Micro SATA HDDs in older laptops and industrial gear
  • Plug‑and‑play with legacy Windows and embedded hardware
  • Adapts 7+9‑pin female Micro SATA to standard IDE 44‑pin male header

Specifications

No published specifications for this item yet.

Questions about this item

What SATA standard does the 1.8 inch Micro SATA 7+9 pin female interface support and what speed does it cap at in practice?

The adapter passes the native Micro SATA signal through to the IDE 44 pin header, so the practical throughput is limited by the drive's own SATA revision and the legacy IDE host controller.

What physical clearance and connector orientation does the PCBA board need to fit inside a laptop or industrial chassis?

The compact circuit board plugs directly into the 44 pin male header on the host side and presents a 7+9 pin female Micro SATA socket for the 1.8 inch drive, requiring only the space needed for both connectors.

How is the adapter installed and which step do users often get wrong when connecting the 1.8 inch Micro SATA drive?

Align the 44 pin male header with the IDE socket on the host, press the board firmly until seated, then attach the Micro SATA drive to the 7+9 pin female port, ensuring the keyed SATA connector is fully inserted before powering on.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.