We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 3.0 cable with 90° down-angled Micro-B connector and panel-mount screws, 1.2m length

SMUGDESK

SMUGDESK 1.2M 90° Down Angled USB 3.0 Type-A to Micro-B Cable with Panel Mount Screws

SKU CH-1NPC-4WYY7

A 1.2 m USB 3.0 cable with a 90° down-angled Micro-B connector and panel-mount screws for secure fixed installations

  • 90° down-angled connector saves space in tight enclosures
  • USB 3.0 delivers up to 5 Gbps data transfer speed
  • Panel-mount screws secure the cable to equipment panels
  • 2 m length suits fixed industrial and embedded wiring
  • Reinforced connectors resist vibration for long-term reliability

Industrial USB 3.0 Cable with Angled Connector

This 1.2M cable has a 90° down-angled Micro-B male connector and a Type-A male plug. It is built for industrial cameras, hard drives and embedded devices that need a fixed panel-mount connection. The design saves space in tight enclosures and supports 5Gbps data transfer. It suits installers who need a secure, vibration-resistant link for permanent wiring.

Check Port Orientation and Mounting Holes

Verify that the target device has a Micro-B 3.0 port and that the 90° down angle points the cable in the required direction inside the chassis. Confirm the panel or bracket has threaded holes that match the supplied screws for a firm mount. Ensure the 1.2M length reaches between the fixed equipment and the host without tension. The cable is not for portable or frequently disconnected use.

Panel Mount Screws Enable Fixed Installation

The included screws let you bolt the Micro-B connector to a panel or equipment chassis, preventing accidental unplugging in high-vibration environments. This turns a standard cable into a permanent interconnect for embedded systems. No extra brackets or adhesives are needed. The fixed mount also keeps the angled strain relief aligned for long-term reliability.

Highlights

  • 90° down-angled connector saves space in tight enclosures
  • USB 3.0 delivers up to 5 Gbps data transfer speed
  • Panel-mount screws secure the cable to equipment panels
  • 2 m length suits fixed industrial and embedded wiring
  • Reinforced connectors resist vibration for long-term reliability

Specifications

No published specifications for this item yet.

Questions about this item

Does the cable come with the panel mount screws or do I need to source them separately?

The panel mount screws are included with the cable for secure installation on devices or panels.

When should I choose the 90 degree down angled Micro B connector over a straight one?

Choose the 90 degree down angled Micro B connector when space is tight behind the device or when the cable must run parallel to the panel surface.

Will the 5Gbps rating deliver full USB 3.0 speed in my industrial camera setup?

The cable supports up to 5Gbps data transfer, matching the USB 3.0 specification, so your industrial camera can achieve its maximum interface throughput.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.