We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey .5m cable with combined eSATA and USB plug to 22pin SATA connector

SMUGDESK

SMUGDESK 0.5m Power eSATA to SATA 22Pin 12V 5V Combined eSATA+USB Internal Drive Adapter Cord

SKU CH-1HA4-C97MQ

Combines eSATA data with 12V and 5V power via USB to run 2.5 and 3.5 SATA drives from a Power eSATA port without a separate adapter

  • Connects external Power eSATA to internal 22pin SATA drives
  • Delivers 12V and 5V power plus data through single cable
  • Supports both 2.5 and 3.5 SATA HDD and SSD
  • Shielded wiring reduces interference for stable data transfer
  • .5 metre length enables tidy wiring in enclosures

Connection made simple

This 0.5m Power eSATA to SATA 22pin cable connects an external Power eSATA port directly to an internal 2.5 or 3.5inch SATA hard drive or SSD. It combines data transmission with 12V and 5V power delivery in a single cord, removing the need for a separate power adapter. The design suits external disk enclosures, DIY storage projects and industrial equipment where a short, tidy link is preferred.

Steady transfer under load

Built-in shielded wiring reduces electromagnetic interference to maintain consistent data transfer during sustained read and write operations. The integrated Power eSATA input feeds both voltage rails simultaneously, so the drive receives stable power without voltage drops that can interrupt long copy sessions. Performance remains reliable as long as the host port supplies adequate current for the attached drive.

Cool, quiet and efficient

The cable operates passively with no active cooling components, producing zero noise and adding negligible heat to the system. Power draw is limited to what the host Power eSATA port provides, keeping overall consumption low. The flexible 0.5m length allows neat routing inside enclosures without obstructing airflow around the drive or other components.

Highlights

  • Connects external Power eSATA to internal 22pin SATA drives
  • Delivers 12V and 5V power plus data through single cable
  • Supports both 2.5 and 3.5 SATA HDD and SSD
  • Shielded wiring reduces interference for stable data transfer
  • .5 metre length enables tidy wiring in enclosures

Specifications

No published specifications for this item yet.

Questions about this item

How much power does the Power eSATA connector draw from the host when the cable runs a 3.5-inch drive all day?

The Power eSATA plug supplies both 12V and 5V rails directly from the host port, so the cable draws whatever current the attached 3.5-inch SATA drive requires; the host must be able to deliver enough amperage or the drive may not spin up.

What host port must my computer already have for this cable to work?

The host side needs a Power eSATA port that combines standard eSATA data with USB power pins; a plain eSATA or USB-only port will not provide the required 12V and 5V supply.

Will the 22-pin SATA end fit the 2.5-inch SSD I already use in my laptop?

Yes, the 22-pin connector matches the unified data-and-power layout on both 2.5-inch and 3.5-inch SATA drives, so your existing SSD plugs in directly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.