We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Half-metre Mini SAS 36-pin male to four SATA 7-pin female cable, black moulded connectors

SMUGDESK

SMUGDESK 0.5M Mini SAS 36Pin SFF-8087 Male to 4 SATA 7Pin Female Cable

SKU CH-HSM8-RKA1P

Connects a Mini SAS 36Pin SFF-8087 controller to four SATA drives with double shielding for stable internal wiring

  • SFF-8087 male splits to four SATA 7Pin ports
  • .5 meter length keeps internal server cabling tidy
  • Double shielding cuts signal loss and EMI
  • Works with PERC H310, H710, H730 RAID cards
  • Molded connectors and flexible jacket survive repeated installs

What this cable does

This Mini SAS SFF-8087 male to four SATA 7Pin female cable connects a RAID controller or host bus adapter directly to four SATA hard drives, SSDs or a SATA backplane. It is built for internal wiring in servers, workstations, NAS units and industrial storage equipment.

The length that decides fit

At 0.5 metre the cable keeps routing tidy inside compact chassis while still reaching from a PCIe RAID card to drive bays or a backplane. Longer runs would need a different length; shorter runs do not exist in this listing.

How it fits the build

The SFF-8087 end plugs into compatible RAID cards such as PERC H310, H710 or H730 and into controllers from Dell, HP, Lenovo, Supermicro, Asus and Gigabyte. Double shielding suppresses electromagnetic interference for stable data transmission. Molded connectors and a flexible jacket withstand repeated insertion and tight routing. Buyers needing more than four SATA connections or a different host interface will need additional or alternative cables.

Highlights

  • SFF-8087 male splits to four SATA 7Pin ports
  • .5 meter length keeps internal server cabling tidy
  • Double shielding cuts signal loss and EMI
  • Works with PERC H310, H710, H730 RAID cards
  • Molded connectors and flexible jacket survive repeated installs

Specifications

No published specifications for this item yet.

Questions about this item

What does the 0.5 m length mean for routing inside a server or NAS?

The half-metre cable keeps internal wiring tidy, reaching from a Mini SAS controller to four SATA drives or a backplane without excess slack that blocks airflow.

How does the SFF-8087 Mini SAS 36-pin interface limit real-world throughput?

The SFF-8087 connector carries four SAS lanes; each attached SATA drive runs at its native SATA speed, so the cable itself does not impose an extra bottleneck.

What clearance do the moulded SFF-8087 and SATA connectors need to fit?

Low-profile moulded ends sit close to the PCB, so they slot into tight drive cages and backplanes where bulkier hoods would foul adjacent cards or latches.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.