We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short braided USB-C to XT60 cable, .5 m, 100 W, 20 V 5 A

SMUGDESK

SMUGDESK 0.5M Braided USB-C to XT60 PD 100W 20V 5A Cable

SKU CH-N7GY-YM2R0

A .5 metre braided cable delivers 100W at 20V 5A from USB-C to XT60 for RC charging

  • 5 m compact length keeps wiring tidy and portable
  • Braided nylon jacket resists wear and bending for long-term use
  • SC100 smart protocol regulates power for stable fast charging
  • XT60 connector handles high current with ToolkitRC chargers
  • 100 W output at 20 V 5 A charges batteries efficiently

0.5M Braided USB-C to XT60 Cable

This short braided cable connects a USB-C power source to an XT60 input, delivering up to 100W at 20V 5A. It is built for RC hobbyists who charge batteries with ToolkitRC equipment and need a tidy, durable link. The SC100 smart protocol regulates power precisely during each charge cycle.

Replaces Longer or Unshielded Leads

Swap out loose, generic wires when a compact 0.5M run keeps a field charging station neat and reduces voltage drop. The upgrade is worth it if your current cable cannot sustain 5A continuously or if the connector feels loose after repeated pack changes.

Plug-and-Play With ToolkitRC Gear

Both ends mate directly — USB-C into a compatible PD source, XT60 into the charger — so no soldering or adapters are required. The braided sheath resists abrasion, but verify that the power source actually negotiates 20V 5A; otherwise the charger will fall back to a lower rate.

Highlights

  • 5 m compact length keeps wiring tidy and portable
  • Braided nylon jacket resists wear and bending for long-term use
  • SC100 smart protocol regulates power for stable fast charging
  • XT60 connector handles high current with ToolkitRC chargers
  • 100 W output at 20 V 5 A charges batteries efficiently

Specifications

No published specifications for this item yet.

Questions about this item

What clearance does the 0.5 m braided cable need to reach a ToolkitRC charger?

The half‑metre length keeps wiring tidy on a bench; allow enough slack so the XT60 plug seats fully without tension on the USB‑C end.

Which way round does the SC100 handshake engage when I plug the XT60 into my ToolkitRC unit?

Insert the USB‑C side into the PD source first, wait for the 20 V 5 A negotiation, then connect the XT60 to the charger; reversing the order can prevent the 100 W profile from activating.

How often should I check the braided jacket and XT60 pins for wear?

Inspect the nylon braid and the high‑current XT60 contacts before each charging session; replace the cable if the sheath frays or the pins show pitting or looseness.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.