Smith Equipment
Smith Equipment MC40-2 Cutting Tip Size 2
A two-piece cutting tip for handheld torches using natural gas or propane, suited for 3/8 to 3/4 inch steel in construction and maintenance work
- TypeWelding Parts & Supplies
- Cuts 3/8 to 3/4 in steel with tip size 2
- Medium preheat flame suits construction and maintenance jobs
- Works with natural gas or propane at 7 scfh preheat
- Compatible with AC309, CC509P, DG109A and MC series torches
- Two-piece tip design for easy replacement and long life
Cutting Tip for Oxy-Fuel Torches
The Smith Equipment MC40-2 is a Size 2 cutting tip designed for handheld oxy-fuel torches. It operates with natural gas or propane at 50 to 60 psig. The two-piece construction suits construction, demolition, maintenance, repair and metal fabrication tasks. It is a new component for professional and hobbyist use.
Medium Preheat Flame for 3/8 to 3/4 Inch Plate
This tip produces a medium preheat flame and consumes 7 scfh of propane during preheat. It cuts cleanly through material from 3/8 inch up to 3/4 inch thick. The MC40 series design matches compatible cutting attachments including AC309, CC509P, DG109A, MC-505 and MC-509. Correct pressure and fuel type are essential for proper performance.
For Handheld Cutting With Compatible Attachments
Welders using Smith handheld torches with the listed attachments will find this tip fits directly. It is not for machine-mounted cutting systems or torches that require a different tip series. Buyers needing to cut plate thicker than 3/4 inch or using acetylene fuel should select a different tip. The product carries a California Proposition 65 warning for cancer and reproductive harm.
Highlights
- Cuts 3/8 to 3/4 in steel with tip size 2
- Medium preheat flame suits construction and maintenance jobs
- Works with natural gas or propane at 7 scfh preheat
- Compatible with AC309, CC509P, DG109A and MC series torches
- Two-piece tip design for easy replacement and long life
Specifications
| Brand | SMITH EQUIPMENT |
|---|---|
| Type | Welding Parts & Supplies |
Questions about this item
What thickness range does the size 2 tip actually cut?
The tip cuts from 3/8 inch up to 3/4 inch material when used with the correct pressure and fuel.
Which cutting attachments accept this MC40 series tip?
It fits AC309, CC509P, DG109A, MC-505 and MC-509 attachments from the same manufacturer.
What fuel pressure does the tip need at the regulator?
The tip operates at 50 to 60 psig inlet pressure for proper pre-heat and cutting performance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
