We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze reducing tee, three by two inches, threaded ends

Smith-Cooper

Smith-Cooper Reducing Tee 3"x2" 125 Brz Nl 4385006260

SKU CH-D1S5-Y5YR8

Reducing tee connects 3-inch and 2-inch pipes at 125 psi in lead-free bronze

  • Reduces pipe diameter from 3" to 2" for flow adaptation
  • Rated 125 pressure class for standard plumbing service
  • Bronze construction with no-lead alloy for potable water safety
  • Smith-Cooper brand fitting manufactured to industry specifications
  • First listed by manufacturer in 2022 as current product

Reducing Tee 3"x2" 125 Brz Nl

This Smith-Cooper reducing tee connects a two-inch branch to a three-inch run in plumbing systems. The bronze construction with a no-lead designation suits potable water installations. Rated for 125 psi, it meets standard pressure requirements for residential and light commercial supply lines. The tee allows flow diversion or combination at a junction point.

Suits installers joining dissimilar pipe sizes

This fitting works for plumbers reducing from three-inch mains to two-inch branches in copper or threaded systems. It is not for gas service unless local code approves the alloy and pressure class. Buyers needing a straight coupling, a different reduction ratio, or a higher pressure rating should select another fitting type.

Pressure class 125 psi governs system compatibility

The 125 psi rating determines whether this tee matches the design pressure of the installation. Verify that the operating pressure plus surge allowance stays within this limit. The bronze no-lead material and 3"x2" configuration are fixed attributes, but the pressure class is the primary filter for correct application.

Highlights

  • Reduces pipe diameter from 3" to 2" for flow adaptation
  • Rated 125 pressure class for standard plumbing service
  • Bronze construction with no-lead alloy for potable water safety
  • Smith-Cooper brand fitting manufactured to industry specifications
  • First listed by manufacturer in 2022 as current product

Specifications

BrandSMITH-COOPER

Questions about this item

How can I confirm the reducing tee is seated correctly after installation?

Check that the 3-inch and 2-inch ends align with the mating pipes and that no leaks appear when the system is pressurised to 125 psi.

What comes with the Smith-Cooper 4385006260 and what must I supply?

The box contains the bronze reducing tee only; you must provide compatible 3-inch and 2-inch pipe, thread sealant or tape, and appropriate wrenches.

Which version of the 3"x2" reducing tee should I select for a 125 psi bronze system?

Choose the 125 Brz Nl model 4385006260; it is the only listed variant rated for 125 psi in bronze.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.