SMARTBOARD
SMARTBOARD UF65W Projector Lamp 200W 3000 Hrs
A 200 W Osram P-VIP replacement lamp module with a 3,000-hour rated life, supplied as a pre-assembled bulb and housing for quick installation
- TypeProjector Lamp
- Wattage200W
- Lamp Life3,000 Hrs.
- Ready to install with pre-assembled bulb and housing
- Bright 200 W output for clear projection
- Tested to 3 000 hours rated lamp life
- Built to ISO 9001 quality standards
- Genuine Osram P-VIP bulb inside
Replacement Lamp for SmartBoard UF65W
The SmartBoard UF65W lamp module ships as a complete 200 W bulb-and-housing assembly ready for direct installation. It uses a new Osram P-VIP 200W bulb rated for 3,000 hours of operation. The unit matches SmartBoard part number 20-01032-20 and is supplied in new condition.
Suitable for SmartBoard UF65W owners needing
This module fits the UF65W projector only; it will not work in other SmartBoard models or third-party projectors. Buyers who require a bare bulb without housing, a different wattage, or a longer rated life should look at alternative lamp types.
Fits the UF65W projector’s existing lamp compartment
No extra brackets, cables or adapters are required because the housing is pre-assembled. Installing the module restores the original 200 W brightness and 3,000-hour rating without modifying the projector’s cooling or power systems.
Highlights
- Ready to install with pre-assembled bulb and housing
- Bright 200 W output for clear projection
- Tested to 3 000 hours rated lamp life
- Built to ISO 9001 quality standards
- Genuine Osram P-VIP bulb inside
Specifications
| Brand | SmartBoard |
|---|---|
| Type | Projector Lamp |
| Wattage | 200W |
| Lamp Life | 3,000 Hrs. |
Questions about this item
Which SmartBoard projector model accepts the UF65W lamp module?
The UF65W lamp module fits SmartBoard projectors that use part number 20-01032-20.
Can the 200W P-VIP bulb operate in a projector designed for a lower-wattage lamp?
No — the projector must be rated for a 200W lamp; using it in a lower-wattage unit can cause overheating or shutdown.
How do I confirm the new lamp is performing correctly after installation?
Reset the projector's lamp-hour counter, then verify the menu shows zero hours and the image reaches full brightness without flicker.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



