We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SmallRig 3488 desk clamp stand with adjustable pole and ball head

SmallRig 3488 Camera Desk Mount Stand 19"-39

SKU CH-0E03-4SFG7

Adjustable desk clamp mount extends from 19 to 39 inches with a 1/4-inch ball head for cameras, lights or phones

  • Part345326-SR
  • ColorBlack
  • ConstructionRubber
  • Specification?3488-SS, 345326-SR, 4.5 L x 5.5 W x 43 H centimeters, 15 ou
  • Compatibilityusb, USB
  • FeaturesUSB
  • Height adjustable from 19 to 39 inches for flexible shooting positions
  • 1/4 inch ball head enables 360 degree rotation and tilt adjustment
  • C-clamp fits desks up to 1.85 inches thick for secure mounting
  • Supports up to 6.6 pounds payload for cameras and lights
  • Compact 4.5 by 5.5 by 43 cm design saves desk space

Height-Adjustable Desktop Mount

The SmallRig 3488 is a C-clamp desk stand that extends from 48.5 cm to 100 cm with a built-in 1/4" ball head and ring-light adapter. It accepts DSLR cameras, smartphones or LED panels and supports up to 3 kg when tilted or 10 kg in vertical orientation. The rubber-grip wingnut locks each of the three pole sections without tools.

Best for Streamers and Tabletop Shooters

Content creators who need a compact, height-variable mount that clamps to desks up to 4.7 cm thick will benefit from the 360° panoramic rotation and -90°/+45° tilt range. It is not suited for buyers who require a floor-standing tripod, a longer boom arm for overhead rigs, or a payload capacity above 10 kg.

100 cm Maximum Height with Ball Head and Clamp

The single specification that decides fit is the 48.5 cm to 100 cm adjustment range measured with the ball head and C-clamp installed. If your shooting position demands a higher eye-line or a lower minimum height than 48.5 cm, this stand will not match the workspace.

Highlights

  • Height adjustable from 19 to 39 inches for flexible shooting positions
  • 1/4 inch ball head enables 360 degree rotation and tilt adjustment
  • C-clamp fits desks up to 1.85 inches thick for secure mounting
  • Supports up to 6.6 pounds payload for cameras and lights
  • Compact 4.5 by 5.5 by 43 cm design saves desk space

Specifications

BrandSmallRig Selection
Model?3488-SS
Part Number345326-SR
Part345326-SR
ColorBlack
ConstructionRubber
Specification?3488-SS, 345326-SR, 4.5 L x 5.5 W x 43 H centimeters, 15 ounces
Compatibilityusb, USB
FeaturesUSB
Dimension4.5 cm x 5.5 cm x 43 cm

Questions about this item

Does the clamp mechanism add noticeable vibration when the stand is fully extended to 100 cm?

The C-clamp tightens down to 4.7 cm thick surfaces and the rubber-ring wingnut locks each 1/4"-20 section, keeping the 3 kg inclined payload steady at full height.

What thread does my light or camera need to mount directly to the 1/4" ball head?

The built-in ball head has a standard 1/4"-20 screw, so any device with a matching 1/4"-20 female thread — ring light, DSLR, phone cage — attaches without extra adapters.

Will the 43 cm folded length fit inside my existing 3883 desk mount bag?

At 4.5 cm × 5.5 cm × 43 cm and 15 ounces, the stand collapses to a slim profile that slides alongside the 3883 mount and 2066B magic arm in most gear bags.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.