Slugger By Fein
Slugger By Fein 63134476041 Annular Cutter
High-speed steel annular cutter with a 3/4-inch Weldon flat shank for one-inch deep cuts
- High-speed steel construction resists wear for longer tool life
- Bright finish reduces friction and improves chip evacuation
- Weldon flat shank locks securely in magnetic drill presses
- 3/4 inch shank fits standard industrial tool holders
- 1 inch cutting depth handles thick plate in a single pass
Annular Cutter 1-7/8" Diameter
The Slugger by Fein 63134476041 annular cutter is a high-speed steel tool designed for magnetic-base drills and similar machines. It produces a 1-7/8 inch diameter hole with a maximum cutting depth of one inch. The bright finish suits general-purpose metal cutting in fabrication and maintenance shops.
Weldon Flat 3/4" Shank
A 3/4 inch Weldon flat shank locks into standard quick-change arbors without additional adapters. The flat prevents rotation under heavy feed pressure while allowing rapid tool changes on the job site. High-speed steel construction resists wear in structural steel, plate and similar ferrous materials.
Upgrade From Smaller Diameter Cutters
This cutter replaces smaller-diameter annular cutters when a single pass must produce a 1-7/8 inch hole. The jump is worthwhile when hole size matches the specification exactly, reducing cycle time versus step-drilling or twist-drill methods. It does not suit applications requiring deeper cuts or different shank styles.
Highlights
- High-speed steel construction resists wear for longer tool life
- Bright finish reduces friction and improves chip evacuation
- Weldon flat shank locks securely in magnetic drill presses
- 3/4 inch shank fits standard industrial tool holders
- 1 inch cutting depth handles thick plate in a single pass
Specifications
| Brand | SLUGGER BY FEIN |
|---|
Questions about this item
What Weldon shank diameter does the 63134476041 annular cutter use?
The cutter has a 3/4 inch Weldon flat shank that fits standard magnetic drill chucks with matching drive.
What hole diameter and maximum cutting depth does this cutter produce?
It cuts a 1 7/8 inch diameter hole to a maximum depth of 1 inch in a single pass.
How is the 63134476041 cutter installed and what step is often missed?
Align the Weldon flat with the chuck set screws, tighten both screws evenly, then verify the pilot pin is seated before starting the cut.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
