Slugger By Fein
Slugger By Fein 63134429042 Annular Cutter 1-11/16" 2" Depth
High-speed steel annular cutter with Weldon flat shank cuts 2 inches deep
- 1-11/16 inch diameter cuts large holes efficiently
- 2 inch cutting depth handles thick material in one pass
- High-speed steel construction resists wear for longer tool life
- Weldon flat shank secures firmly in magnetic drill chucks
- 3/4 inch shank diameter fits standard industrial tool holders
Slugger By Fein 63134429042 Annular Cutter
This annular cutter is built for metalworkers who need precise holes in structural steel or heavy plate. The High Speed Steel body with a bright finish resists wear during repetitive drilling tasks. It fits magnetic-base drills and other machines that accept a Weldon Flat shank. The 3/4 in shank diameter ensures a secure lock in compatible tool holders.
1-11/16 inch cutting diameter
The single specification that decides fit is the 1 11/16 in cutting diameter. This exact size must match the hole requirement for bolts, pipes or fasteners in the job plan. A mismatch means the hole will be too large or too small for the intended hardware. Verify the target diameter before selecting this cutter.
2 inch maximum cutting depth
The cutter handles material up to 2 in thick in a single pass, suitable for thick plate, beam flanges or stacked sections. It runs out when the workpiece exceeds this depth or when the machine cannot reach the full stroke. For deeper holes, a longer cutter or multi-step process is required.
Highlights
- 1-11/16 inch diameter cuts large holes efficiently
- 2 inch cutting depth handles thick material in one pass
- High-speed steel construction resists wear for longer tool life
- Weldon flat shank secures firmly in magnetic drill chucks
- 3/4 inch shank diameter fits standard industrial tool holders
Specifications
| Brand | SLUGGER BY FEIN |
|---|
Questions about this item
What does the 1-11/16 inch diameter mean when the cutter is in a real machine?
It produces a hole with a finished diameter of 1-11/16 inches when used in a compatible magnetic drill or drill press.
What does the Weldon Flat and 3/4 inch shank diameter cap in practice?
The Weldon Flat on a 3/4 inch shank fits standard magnetic drill arbors and limits use to machines accepting that shank size.
What does the annular cutter physically need to fit or mount?
It requires a magnetic drill or drill press with a 3/4 inch Weldon shank arbor and at least 2 inches of cutting depth capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
