Slugger By Fein
Slugger By Fein 63134302041 Annular Cutter 1-3/16" pneumatic accessory
Annular cutter with a 3/4 in Weldon shank cuts up to 1 in deep in steel
- Cuts clean holes fast with high-speed steel construction
- Bright finish resists corrosion during heavy-duty drilling
- 1-inch cutting depth handles thick plate in one pass
- Weldon flat shank locks securely in magnetic drill chucks
- 3/4-inch shank fits standard industrial tool holders
Slugger By Fein Annular Cutter 1-3/16
The Slugger By Fein 63134302041 is a high-speed steel annular cutter designed for magnetic-base drills and other machines that accept a 3/4-inch Weldon-flat shank. It produces a clean 1-3/16-inch diameter hole with a maximum cutting depth of 1 inch, making it suitable for structural steel fabrication and maintenance work where precise through-holes are required. The bright finish provides basic corrosion resistance during storage and use.
Thermals noise and power draw in normal use
As a passive cutting accessory the tool generates no electrical noise and draws no power of its own; all rotational force and cooling come from the host drill. Heat builds only in the cutting zone and is managed by the operator's choice of cutting fluid or air blast. Vibration and audible output depend entirely on the driving machine and the material being drilled.
Weldon flat shank and bright finish
The 3/4-inch Weldon flat shank locks securely into standard magnetic-drill arbors without additional adapters, reducing setup time on job sites. The bright high-speed steel surface ships without coating so users can apply their preferred cutting fluid or lubricant immediately. No pilot pin, coolant system or software is bundled with the cutter.
Highlights
- Cuts clean holes fast with high-speed steel construction
- Bright finish resists corrosion during heavy-duty drilling
- 1-inch cutting depth handles thick plate in one pass
- Weldon flat shank locks securely in magnetic drill chucks
- 3/4-inch shank fits standard industrial tool holders
Specifications
| Brand | SLUGGER BY FEIN |
|---|
Questions about this item
How do I install the annular cutter and what step is often missed?
Insert the 3/4 in Weldon Flat shank into the tool holder and fully seat the set screw on the flat so the cutter cannot rotate under load.
What maintenance or replacement will this cutter need later?
The high-speed steel teeth dull with use; resharpen or replace the cutter when feed pressure rises or hole quality drops.
What limit appears first during sustained cutting?
The 1 in maximum cutting depth caps each plunge; deeper holes require multiple passes or a longer cutter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
