Slip Plate
Slip Plate SLIP1-4X1G dry lubricant, 1 gal can, mineral spirits, graphite
Dry graphite lubricant in mineral spirits operates from minus 75 to 450 degrees Fahrenheit and contains 49 percent VOCs
- Dry graphite film cuts friction without attracting grit
- Operates from -75 °F to 450 °F for extreme temperature ranges
- Mineral spirits carrier ensures quick evaporation and even coating
- 49 % VOC content complies with many industrial requirements
- One-gallon can supplies ample volume for high-use applications
Slip Plate SLIP1-4X1G dry lubricant
Slip Plate SLIP1-4X1G is a general-purpose dry lubricant supplied in a one-gallon can. It uses mineral spirits as a carrier with graphite as the primary solid additive. The product is designed for machinery and machine-shop applications where a dry film is preferred over wet oils or greases. It is not intended for buyers who need a food-grade or NSF-rated lubricant.
Sustained load behaviour
The lubricant maintains its dry film across a wide operating range from minus 75 degrees Fahrenheit to 450 degrees Fahrenheit. Graphite provides solid lubrication that does not evaporate or degrade quickly under continuous high-temperature exposure. The mineral spirits carrier flashes off at 105 degrees Fahrenheit, leaving the graphite layer to reduce friction during extended operation. It is not suited for applications requiring a non-flammable or non-combustible fluid.
Thermals, noise and power draw
As a passive chemical product, it generates no noise and draws no power during use. The dry film remains stable up to the 450-degree Fahrenheit maximum operating temperature without producing vapour that would affect the surrounding environment. The formula contains 49 percent volatile organic compounds by content and is not compliant with 50-state VOC regulations. It carries a California Proposition 65 warning for reproductive harm.
Highlights
- Dry graphite film cuts friction without attracting grit
- Operates from -75 °F to 450 °F for extreme temperature ranges
- Mineral spirits carrier ensures quick evaporation and even coating
- 49 % VOC content complies with many industrial requirements
- One-gallon can supplies ample volume for high-use applications
Specifications
| Brand | SLIP PLATE |
|---|
Questions about this item
How much heat can the graphite-and-mineral-spirits formula handle before it breaks down?
The lubricant is rated for continuous use up to 450 degrees F, so it remains stable on hot machinery surfaces.
What surface preparation or existing coating is required before applying this dry lubricant?
It can be applied directly to clean metal, wood, plastic or concrete without a primer or pre-existing coating.
Will the 49 percent VOC content prevent use in a shop that must meet strict state air-quality rules?
The product is not 50-state VOC compliant, so check local regulations before using it in areas with tighter limits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
