We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rubber snap-in tubeless tyre valve stem 1 1/4 in TR 413

Slime

Slime 2080-A TR 413 Valve Stem 1 1/4 in Black

SKU CH-0CQT-4VTP7

Snap-in tubeless tyre valve stem with 180-degree angle and 1 1/4 in length

  • TypeAutomotive Brakes, Steering & Suspension
  • ColorBlack
  • TR 413 standard bore fits most tubeless tires
  • Snap-in mounting installs without tools
  • 180° straight stem clears wheel spokes
  • 453 in maximum rim hole ensures secure seal
  • Rubber construction resists ozone and weathering

Snap-In Tubeless Valve Stem TR 413

The Slime 2080-A is a rubber snap-in valve stem designed for tubeless tyres on any vehicle. It fits a 0.453 in rim hole and has an overall length of 1 1/4 in. The straight 180-degree angle suits standard wheel profiles. Buyers fitting new or replacement tubeless valves will find this stem matches the TR 413 specification.

Practical limits of the snap-in interface

A snap-in stem relies on rubber compression to seal against the rim hole, so the hole must be clean, round and within the 0.453 in maximum size. The stem is rated for standard-bore cores and caps only. Over-tightening the core or using high-pressure extensions can distort the rubber base and cause leaks. The 1 1/4 in length may not clear deep-dish wheels or heavy brake calipers.

Check your wheel and tyre setup first

Confirm the rim hole diameter does not exceed 0.453 in and that the wheel face allows a straight 180-degree stem without interference. Verify the tyre is tubeless and the valve hole is free of burrs or corrosion. Ensure you have a standard-bore valve core tool and compatible caps. Orders below $75 may incur a shipping charge from the supplier.

Highlights

  • TR 413 standard bore fits most tubeless tires
  • Snap-in mounting installs without tools
  • 180° straight stem clears wheel spokes
  • 453 in maximum rim hole ensures secure seal
  • Rubber construction resists ozone and weathering

Specifications

BrandSLIME
TypeAutomotive Brakes, Steering & Suspension
ColorBlack

Questions about this item

What does the 1 1/4 in length mean for fitment?

The overall length is 1 1/4 in and the valve stem angle is 180 degrees, giving a straight snap-in fit for standard tubeless rims with a 0.453 in hole.

What does TR 413 indicate about the valve?

TR 413 is the standard bore tubeless valve type used on most passenger and light-truck wheels, and this stem is made of black rubber for that application.

What limits the maximum rim hole size of 0.453 in?

The snap-in design requires a 0.453 in rim hole; larger holes will not seal and smaller holes will not accept the stem.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.