Skullcandy SLYR S6SYY-P003 Wired Gaming Headset 50mm 40ohm 95dB 3.5mm Black
Wired over-ear gaming headset with 50 mm drivers, 40 ohm impedance, 95 dB sensitivity and a detachable boom mic with LED mute indicator
- TypeOver the Ear
- ColorBlack
- Driver Unit50 millimeters
- Frequency Response5Hz-20KHz
- THDOver Ear
- Input Impedance40 ohms
- Rich, detailed sound from 50mm tuned drivers
- Clear team chat via removable bi-directional mic with LED status
- Plug-and-play on PC, consoles and mobile via 3.5mm cable
- Lightweight 265g frame with memory-foam cushions for long sessions
- Passive noise isolation keeps you focused on the game
What It Is
The Skullcandy SLYR S6SYY-P003 is a wired over-ear gaming headset built around 50mm dynamic drivers with a 40 ohm impedance and 95dB sensitivity. A removable boom microphone with an LED mute indicator provides clear voice pickup for team chat. The 3.5mm connector enables plug-and-play use on PC, PlayStation, Xbox, Nintendo Switch and mobile devices. Memory-foam ear cushions and a 265g lightweight frame are designed for extended comfort.
Upgrade Path
This headset replaces basic stereo headsets that lack a detachable microphone or on-board volume and mute controls. The jump is worthwhile when you need a single 3.5mm solution that works across multiple consoles and a PC without adapters or software. It also suits players who want a dedicated boom mic they can remove for solo play or travel. Buyers who want wireless freedom, active noise cancellation or software-driven EQ profiles should look elsewhere.
Compatibility Check
Verify that your controller or device provides a standard 3.5mm combined audio jack (CTIA wiring) for both game audio and microphone input. Some older controllers require a separate stereo headset adapter. Ensure the 5ft cable length reaches your seating position comfortably. No external power or driver installation is required for basic stereo operation.
Highlights
- Rich, detailed sound from 50mm tuned drivers
- Clear team chat via removable bi-directional mic with LED status
- Plug-and-play on PC, consoles and mobile via 3.5mm cable
- Lightweight 265g frame with memory-foam cushions for long sessions
- Passive noise isolation keeps you focused on the game
Specifications
| Brand | Skullcandy |
|---|---|
| Series | 6 |
| Model | SLYR, S6SYY-P003 |
| Part Number | S6SYY-P003 |
| Type | Over the Ear |
| Color | Black |
| Driver Unit | 50 millimeters |
| Frequency Response | 5Hz-20KHz |
| THD | Over Ear |
| Input Impedance | 40 ohms |
| Signal to Noise Ratio(SNR) | 95 decibels |
| Power Supply | lithium_polymer, product_specific, true |
| Sensitivity | 95 decibels |
| Connector | 3.5mm |
| Ear Coupling | over_ear |
| Cord Length | 3.5mm Cable - 5ft |
| Weight | 265 grams |
| Noise Cancelling | sound_isolation |
| Wireless Type | Auxiliary |
| Microphone Impedance | 140 ohm |
| Microphone Frequency Response | 20Hz-20KHz |
| Microphone Signal to Noise Ratio(SNR) | 95 decibels |
| Microphone Sensitivity | 95 decibels |
| Features | sound_isolation, 5.2, Retractable, Volume Control, push_button, Wired, Over Ear, dynamic_driver, 140 ohm, Cable |
| Package Contents | Cable, Removable Bom Mic, 3.5mm Cable - 5ft, PC Splitter Cable - 3ft |
Questions about this item
What size ear cushions does the 50 mm driver headset use?
The over-ear cups are fitted with ultra-soft memory-foam cushions that fully enclose the ears for noise isolation and long-session comfort.
How do you attach the removable boom microphone and confirm it is live?
Insert the boom into the left ear-cup port until it clicks; the built-in LED on the microphone lights to show the mic is active and unmuted.
When should the memory-foam ear cushions be replaced?
Replace the cushions once they lose their seal, show surface cracking or no longer spring back, typically after extended daily use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HQRP 2-Pack 10 ft 2.1mm x 5.5mm DC Power Extension Cable + Coaster
- Black



