We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SKF 9960 rotary shaft seal, nitrile rubber, transparent finish, 1 by 1.686 by .25 in

SKF

SKF 9960 Rotary Shaft Seal CRW1 Nitrile 1 x 1.686 x .25 in

SKU CH-SH6N-6FBZG

Rotary shaft seal with 1 in bore, 1.686 in outside diameter and 0.25 in width for oils, greases and fuels up to 10 psi and 3,840 RPM

  • ColorTransparent
  • Reliable sealing up to 10 psi pressure rating
  • Handles rotational speeds to 3,840 RPM for engine use
  • Nitrile rubber lip resists oils, fuels and greases
  • Carbon steel spring maintains consistent lip contact over time
  • Acrylic-coated case protects against corrosion in harsh fluids

SKF 9960 Rotary Shaft Seal

The SKF 9960 is a CRW1-design rotary shaft seal built for automotive and industrial maintenance. It fits shafts with a 1 in inside diameter and a 1.686 in outside diameter. Mechanics and engineers use it to retain lubricants and exclude contaminants in rotating equipment.

10 psi maximum pressure rating

This seal is rated for a maximum pressure of 10 psi, which determines its suitability for low-pressure sealing tasks. Exceeding this limit can cause leakage or lip failure. Verify your system pressure before installation to ensure reliable performance.

Nitrile lip with carbon-steel spring

The single nitrile rubber lip resists animal and vegetable oils, diesel, gasoline, greases, hot water, light heating oil and mineral oils. A carbon-steel garter spring maintains consistent lip contact up to 3,840 RPM and 5.09 mps surface speed. The acrylic-coated case aids installation and corrosion resistance.

Highlights

  • Reliable sealing up to 10 psi pressure rating
  • Handles rotational speeds to 3,840 RPM for engine use
  • Nitrile rubber lip resists oils, fuels and greases
  • Carbon steel spring maintains consistent lip contact over time
  • Acrylic-coated case protects against corrosion in harsh fluids

Specifications

BrandSKF
ColorTransparent

Questions about this item

How does the 3,840 RPM limit affect daily use?

The seal is rated for continuous operation up to 3,840 RPM. Above that speed the lip may overheat and wear prematurely, so match the shaft speed to this ceiling.

What does the 10 psi pressure rating mean for sealing performance?

The seal handles up to 10 psi differential pressure. Higher system pressure can push the lip off the shaft, causing leakage.

Will the 1.686 in outside diameter and 0.25 in width fit my housing?

The seal needs a bore of 1.686 in and a 0.25 in wide groove. Verify both dimensions before installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.