We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SKF 99162 stainless steel wear sleeve, chromium plated, 41.2 to 41.35 mm shaft range

SKF

SKF 99162 Wear Sleeve 41.2-41.35mm Shaft Range

SKU CH-G03X-DJF0H

Stainless-steel wear sleeve restores 41.2 to 41.35 mm shafts, 14.3 mm width on shaft, chromium plated for 225 °F service

  • ColorTransparent
  • Protects shaft surfaces with stainless steel wear sleeve
  • Fits 41.2 to 41.35 mm shaft diameters precisely
  • Withstands 225 °F maximum operating temperature
  • Chromium plated finish resists corrosion in heavy use
  • 3 mm shaft width ensures secure installation

Engine Repair Wear Sleeve

The SKF 99162 wear sleeve fits shafts measuring 41.2 to 41.35 mm. It restores the sealing surface on heavy industrial equipment without replacing the shaft. Mechanics and maintenance teams use it to extend component life during engine overhauls.

Thermal and Material Performance

Stainless steel construction with chromium plating withstands temperatures up to 225 degrees F. The 0.28 mm wall thickness maintains structural integrity under normal operating loads. Flange diameter of 47.63 mm provides a stable mounting surface for seals.

Installation Fit and Clearance

Overall width measures 17.48 mm with a 14.3 mm width on the shaft. Outside diameter tolerance is +/- 1.6 mm and width tolerance is +/- 0.8 mm. Metric sizing ensures compatibility with standard industrial shaft dimensions.

Highlights

  • Protects shaft surfaces with stainless steel wear sleeve
  • Fits 41.2 to 41.35 mm shaft diameters precisely
  • Withstands 225 °F maximum operating temperature
  • Chromium plated finish resists corrosion in heavy use
  • 3 mm shaft width ensures secure installation

Specifications

BrandSKF
ColorTransparent

Questions about this item

How is the SKF 99162 wear sleeve installed, and what step is most often done wrong?

Press the stainless-steel sleeve onto the shaft so the 14.3 mm width on shaft seats fully; the step most often missed is cleaning the shaft to a smooth finish before pressing, otherwise the 0.28 mm wall cannot seat evenly.

What maintenance or replacement will the SKF 99162 wear sleeve need later?

The chromium-plated stainless sleeve is a wear surface; replace it when the 0.28 mm wall shows scoring or when the flange diameter of 47.63 mm no longer seats squarely in the housing.

What limit appears first on the SKF 99162 wear sleeve under sustained use?

The 225 °F maximum temperature is the first limit reached; above it the chromium plating and stainless substrate can lose hardness, so keep operating temperature below that figure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.