We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SKF 99150 stainless steel shaft sleeve chromium plated finish 1.497 to 1.503 in diameter

SKF

SKF 99150 Shaft Sleeve 1.497-1.503 in

SKU CH-NAQX-AVVCB

Stainless steel wear sleeve for 38.02 to 38.18 mm shafts with chromium-plated finish rated to 225 degrees F

  • ColorTransparent
  • Fits shafts from 1.497 to 1.503 in for precise sealing
  • Stainless steel with chromium plating resists corrosion in heavy industrial use
  • Withstands temperatures up to 225 °F for reliable high-heat performance
  • Thin 0.28 mm wall and 9.53 mm shaft width enable compact installation
  • Tight tolerances of ±1.6 mm OD and ±0.8 mm width ensure consistent fit

Shaft Sleeve for 38 mm Shafts

The SKF 99150 wear sleeve fits shaft diameters from 38.02 mm to 38.18 mm. Its stainless steel body carries a chromium plated finish for corrosion resistance. The sleeve suits heavy industrial applications where shaft surfaces need protection or restoration. It installs directly onto the shaft without requiring a larger housing bore.

Thermal Limit and Dimensional Tolerances

Maximum operating temperature reaches 225 Degrees F for sustained service. Outside diameter tolerance is held to +/- 1.6 mm while width tolerance sits at +/- 0.8 mm. Wall thickness measures 0.28 mm, keeping radial clearance minimal. The metric design ensures consistent fit across the stated shaft range.

Flange and Width on Shaft

A 45.24 mm flange diameter locates the sleeve axially during installation. Overall width is 12.7 mm with 9.53 mm of active contact width on the shaft. These dimensions position the wear surface precisely where the seal rides. The transparent colour allows visual inspection of the underlying shaft condition.

Highlights

  • Fits shafts from 1.497 to 1.503 in for precise sealing
  • Stainless steel with chromium plating resists corrosion in heavy industrial use
  • Withstands temperatures up to 225 °F for reliable high-heat performance
  • Thin 0.28 mm wall and 9.53 mm shaft width enable compact installation
  • Tight tolerances of ±1.6 mm OD and ±0.8 mm width ensure consistent fit

Specifications

BrandSKF
ColorTransparent

Questions about this item

How do I install the SKF 99150 shaft sleeve onto a 38.02-38.18 mm shaft?

Press the chromium-plated stainless steel sleeve onto the clean shaft until the 9.53 mm shaft-contact width seats fully; the 0.28 mm wall thickness requires even pressure to avoid distortion.

What maintenance or replacement does the SKF 99150 sleeve need over time?

Inspect the 0.28 mm wall for wear grooves or chromium-plate damage; replace the sleeve if the 45.24 mm flange shows corrosion or the press fit loosens on the 38.02-38.18 mm shaft.

What is the first limit reached under sustained heavy-industrial use of the SKF 99150 sleeve?

The 225 °F maximum temperature limit is reached before the 0.28 mm wall wears through, especially when shaft speed generates heat faster than the 12.7 mm overall width can dissipate it.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.