We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SKF 99138 stainless steel wear sleeve chromium plated 34.82 to 34.98 mm shaft range

SKF

SKF 99138 Wear Sleeve 34.82-34.98mm Shaft Range

SKU CH-CGQZ-KJ99W

Stainless steel sleeve fits 34.82 to 34.98 mm shafts, 12.7 mm width on shaft, chromium plated for heavy industrial use up to 225 degrees F

  • ColorTransparent
  • Restores seal surface on worn shafts
  • Fits 34.82 to 34.98 mm shaft diameters
  • Withstands 225 °F in heavy industrial use
  • Thin 0.28 mm wall keeps assembly compact
  • Chromium-plated stainless steel resists corrosion

Precision Shaft Repair Sleeve

The SKF 99138 wear sleeve fits shafts measuring 34.82 to 34.98 mm in diameter. It is designed for heavy industrial applications where a damaged sealing surface must be restored quickly. The stainless steel construction with chromium plated finish resists corrosion and operates at temperatures up to 225 degrees F.

Straightforward Press-Fit Installation

The sleeve installs by pressing it onto the cleaned shaft until the 12.7 mm width on shaft covers the worn area. Its 0.28 mm wall thickness adds minimal bulk while the 41.61 mm flange diameter provides a positive stop. Problems arise if the shaft diameter falls outside the 34.82 to 34.98 mm range or if the surface is not clean and free of burrs before fitting.

Verify Shaft Dimensions First

Before ordering, measure the shaft diameter at multiple points to confirm it sits within the 34.82 to 34.98 mm tolerance. Check that the 15.88 mm overall width and 41.61 mm flange diameter clear adjacent components. The metric sizing and +/- 1.6 mm outside diameter tolerance require a compatible shaft for a reliable seal.

Highlights

  • Restores seal surface on worn shafts
  • Fits 34.82 to 34.98 mm shaft diameters
  • Withstands 225 °F in heavy industrial use
  • Thin 0.28 mm wall keeps assembly compact
  • Chromium-plated stainless steel resists corrosion

Specifications

BrandSKF
ColorTransparent

Questions about this item

How can I confirm the SKF 99138 wear sleeve is seated correctly after installation?

Measure the installed width on the shaft; it should read 12.7 mm. The flange diameter will be 41.61 mm and the overall width 15.88 mm when properly positioned.

What comes with the SKF 99138 wear sleeve and what must I source separately?

The box contains the chromium-plated stainless-steel sleeve only, sized for 34.82–34.98 mm shafts. You will need the matching seal, installation tooling and any retaining hardware separately.

Which shaft diameter range should I select for the SKF 99138?

Choose this 99138 sleeve when your shaft measures between 34.82 mm and 34.98 mm; the sleeve’s wall thickness is 0.28 mm and it tolerates up to 225 °F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.