We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel wear sleeve, chromium plated, 22.17 to 22.28 mm shaft range

SKF

SKF 99087 Wear Sleeve 22.17-22.28mm Shaft Range

SKU CH-VT4Y-2REFE

Stainless-steel wear sleeve protects shafts from 22.17 to 22.28 mm with a 7.95 mm contact width and chromium-plated finish

  • ColorTransparent
  • Restores shaft surface with 22.17-22.28 mm range
  • Thin 0.28 mm wall fits tight clearances
  • Chromium-plated stainless steel resists 225 °F heat
  • 95 mm contact width seals reliably
  • Precise 27.79 mm flange aligns accurately

SKF 99087 Wear Sleeve for 22.17–22.28 mm Shafts

This SKF wear sleeve fits shafts ranging from 22.17 mm to 22.28 mm in diameter. It is designed for heavy industrial applications where a damaged sealing surface needs repair. The stainless steel construction with chromium plating resists wear and corrosion up to 225 degrees F.

Chromium-plated stainless steel

The sleeve has an overall width of 11.13 mm and a width on shaft of 7.95 mm. Its wall thickness is 0.28 mm and the flange diameter measures 27.79 mm. These tolerances of +/- 1.6 mm on outside diameter and +/- 0.8 mm on width ensure a consistent fit for the sealing system.

Press-fit installation requires clean.

The sleeve installs by pressing it onto the prepared shaft surface within the specified size range. Installation problems usually arise if the shaft is outside the 22.17 to 22.28 mm limits or has deep grooves that prevent full contact. Proper alignment during pressing avoids flange distortion.

Highlights

  • Restores shaft surface with 22.17-22.28 mm range
  • Thin 0.28 mm wall fits tight clearances
  • Chromium-plated stainless steel resists 225 °F heat
  • 95 mm contact width seals reliably
  • Precise 27.79 mm flange aligns accurately

Specifications

BrandSKF
ColorTransparent

Questions about this item

When should the stainless steel wear sleeve be replaced?

Replace the sleeve if the 0.28 mm wall thickness shows wear or if the chromium plated finish is damaged, as this affects sealing performance on the 22.17 to 22.28 mm shaft range.

What is the first limit reached during sustained operation?

The maximum temperature limit of 225 degrees F is the primary constraint for continuous heavy industrial use.

How much heat does the sleeve generate during all-day operation?

The sleeve itself generates no heat; it operates passively within the 225 degrees F maximum temperature rating of the chromium plated stainless steel.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.