SK hynix
SK hynix HMAA4GU6AJR8N-XN 32GB DDR4 3200 CL22 1.2V RDIMM desktop RAM
A 32 GB DDR4 RDIMM running at 3200 MHz with CL22 latency and 1.2 V operation
- Capacity32GB
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL22
- Voltage1.20V
- ECCNo
- Buffered/RegisteredUnbuffered
- 32 GB capacity lets you run heavy workloads without swapping
- DDR4 3200 speed moves data at PC4-25600 bandwidth
- CL22 latency keeps response tight for everyday tasks
- 2 V operation reduces power draw and heat
- 288-pin RDIMM form factor fits standard desktop DIMM slots
Single-Module 32 GB DDR4 Upgrade
This SK hynix RDIMM delivers 32 GB of DDR4 memory in a single 288-pin module rated for 3200 MT/s at CL22. It operates at the standard 1.2 V and is unbuffered, making it a straightforward capacity addition for compatible desktop systems.
Builders Needing Maximum Capacity Per Slot
The 32 GB density suits users who want to reach high total memory without populating every slot, leaving room for future expansion. Systems limited to lower-density modules, or platforms that require registered ECC memory, will not be able to use this stick.
32 GB Density Decides Fit
The decisive specification is the 32 GB capacity per module; the motherboard and CPU memory controller must support this density in an unbuffered DDR4 DIMM for the upgrade to work.
Highlights
- 32 GB capacity lets you run heavy workloads without swapping
- DDR4 3200 speed moves data at PC4-25600 bandwidth
- CL22 latency keeps response tight for everyday tasks
- 2 V operation reduces power draw and heat
- 288-pin RDIMM form factor fits standard desktop DIMM slots
Specifications
| Brand | Hynix |
|---|---|
| Series | Desktop Memory |
| Model | HMAA4GU6AJR8N-XN |
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
Questions about this item
Will the 288-pin RDIMM form factor fit my desktop motherboard DIMM slots?
This module uses the standard 288-pin RDIMM form factor for DDR4 desktop memory. It fits any desktop motherboard with DDR4 DIMM slots that accept registered modules; verify your board supports registered DIMMs before purchase.
What BIOS setting should I check after installing this 3200 MHz CL22 module?
Enable the XMP or DOCP profile in BIOS so the module runs at its rated 3200 MHz speed and CL22 latency; otherwise it will default to a lower JEDEC frequency.
Does this 1.20 V unbuffered module need any firmware updates or periodic maintenance?
No firmware updates or routine maintenance are required for this DDR4 RDIMM. If a memory error appears later, reseat the module or test with a single stick to isolate the fault.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



