SK hynix
SK hynix HMA851U6DJR6N-XN 8GB (2x4GB) DDR4 3200MHz PC4-3200AA UDIMM 1.2V desktop RAM
A matched pair of 4 GB unbuffered DDR4 modules running at 3200 MHz with a low 1.2 V operating voltage
- Capacity8GB (2 x 4GB)
- SpeedDDR4 3200 (PC4 25600)
- Voltage1.20V
- ECCNo
- Buffered/RegisteredUnbuffered
- Dual-channel 8 GB kit boosts multitasking headroom
- 3200 MHz DDR4 speed feeds data faster to the CPU
- Low 1.2 V operation reduces system power draw
- Unbuffered 288-pin UDIMM fits standard desktop slots
- Two 4 GB modules enable matched-pair performance
Kit composition
This SK hynix kit provides 8 GB of desktop memory as two 4 GB unbuffered UDIMM modules. It suits builders adding standard capacity to a DDR4 platform. Buyers who want more storage or need ECC error correction should look elsewhere.
DDR4 interface limits
The modules run at DDR4 3200 (PC4-25600) with a 1.2 V operating voltage and 288 pins. This is the electrical and mechanical ceiling of the DDR4 UDIMM standard; faster speeds or lower voltages are not defined for this form factor.
Matched-pair specification
The two modules are factory matched for identical 4 GB capacity and DDR4 3200 timing. A single module or a mixed-capacity set would not deliver the same dual-channel behaviour.
Highlights
- Dual-channel 8 GB kit boosts multitasking headroom
- 3200 MHz DDR4 speed feeds data faster to the CPU
- Low 1.2 V operation reduces system power draw
- Unbuffered 288-pin UDIMM fits standard desktop slots
- Two 4 GB modules enable matched-pair performance
Specifications
| Brand | Hynix |
|---|---|
| Series | Desktop Memory |
| Model | HMA851U6DJR6N-XN |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR4 3200 (PC4 25600) |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
Questions about this item
Should I pick the 2x4GB kit or a single 8GB module?
This kit provides two 4GB modules for 8GB total, enabling dual-channel operation on boards with two or four slots; a single 8GB stick would run in single-channel mode unless a second identical module is added later.
What does the DDR4-3200 rating deliver in daily use?
The modules run at 3200 MT/s with a PC4-25600 bandwidth ceiling, giving noticeably snappier multitasking and gaming frame-times versus 2666 MT/s memory when the CPU and motherboard support the speed.
Will the 288-pin UDIMM fit my DDR4 board and what speed ceiling applies?
Yes, the 288-pin unbuffered DIMM is the standard DDR4 desktop form factor; the kit is rated for DDR4-3200 (PC4-25600) and will down-clock automatically if the platform only supports a lower data rate.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



