SK hynix
SK hynix HMA851S6DJR6N-VK 8GB (2×4GB) DDR4 2666 laptop RAM
Adds 8 GB of DDR4 2666 memory in two 4 GB SO-DIMM modules at 1.20 V CL19
- Capacity8GB (2 x 4GB)
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Voltage1.20V
- ECCNo
- 8 GB total capacity in a matched pair of 4 GB modules
- DDR4 2666 speed rated at PC4-21300 for responsive multitasking
- Low 1.20 V operation reduces power draw and heat
- CL19 latency timing supports smooth everyday performance
- 260-pin SO-DIMM form factor fits standard laptop memory slots
8 GB DDR4 2666 SO-DIMM kit
This SK hynix kit provides 8 GB of DDR4 laptop memory across two 4 GB modules. The SO-DIMMs run at 2666 MHz with a CAS latency of CL19 and operate at the standard 1.20 V. They are unbuffered and non-ECC, matching the common specification for mainstream notebooks.
Suits standard DDR4 laptop upgrades
Builders upgrading a notebook that accepts 260-pin DDR4 SO-DIMMs at 2666 MHz can use this pair. Systems that require ECC registered modules or a different pin count cannot use this kit. Buyers needing a single 8 GB stick or a higher total capacity should look at other configurations.
260-pin DDR4 SO-DIMM form factor
The decisive specification is the 260-pin DDR4 SO-DIMM interface combined with the DDR4 2666 (PC4-21300) speed rating. Only platforms that support this exact pin layout and data rate will accept the modules.
Highlights
- 8 GB total capacity in a matched pair of 4 GB modules
- DDR4 2666 speed rated at PC4-21300 for responsive multitasking
- Low 1.20 V operation reduces power draw and heat
- CL19 latency timing supports smooth everyday performance
- 260-pin SO-DIMM form factor fits standard laptop memory slots
Specifications
| Brand | Hynix |
|---|---|
| Series | SODIMM Laptop Memory |
| Model | HMA851S6DJR6N-VK |
| Capacity | 8GB (2 x 4GB) |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
Questions about this item
Does the DDR4 2666 interface cap at PC4-21300 bandwidth in practice?
Yes, the kit runs at DDR4-2666 which corresponds to a PC4-21300 data rate.
Will the 260-pin SO-DIMM modules fit my laptop's memory slots?
Each module uses the standard 260-pin DDR4 SO-DIMM form factor used by most modern notebooks.
How do I install the two 4 GB sticks, and what step do people often miss?
Power off, unplug, open the panel, insert each stick at an angle until the side clips click — many forget to press down firmly until both clips lock.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



