SK hynix
SK hynix HMA82GS6DJR8N-VK 32GB (2x16GB) DDR4 2666MHz CL19 260-pin laptop RAM
A 32 GB dual-channel DDR4 SO-DIMM kit with two 16 GB modules running at 2666 MHz CL19
- Capacity32GB (2 x 16GB)
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Voltage1.20V
- ECCNo
- 32 GB total capacity from two 16 GB modules
- DDR4 2666 MHz speed for responsive multitasking
- CL19 latency balances timing and stability
- 260-pin SO-DIMM fits standard laptop slots
- 20 V operation reduces power draw
32 GB DDR4 SO-DIMM kit
This kit delivers 32 GB of DDR4 memory in two 16 GB modules that run at 2666 MHz with CL19 latency. The 260-pin SO-DIMM form factor fits standard laptop slots and operates at 1.20 V. It is built for users who need a straightforward capacity upgrade without extra features.
Suits laptops needing 32 GB at 2666 MHz
The modules are unbuffered and non-ECC, matching most consumer notebook requirements. Buyers who need ECC error correction or registered memory for workstation stability should look elsewhere. Systems limited to lower speeds or different pin counts will not accept these sticks.
2666 MHz DDR4 speed decides fit
The PC4-21300 rating sets the maximum data rate the kit guarantees. If a laptop requires a higher or lower rated speed, these modules may not run at their specified timing. Verify the platform supports DDR4-2666 before purchase.
Highlights
- 32 GB total capacity from two 16 GB modules
- DDR4 2666 MHz speed for responsive multitasking
- CL19 latency balances timing and stability
- 260-pin SO-DIMM fits standard laptop slots
- 20 V operation reduces power draw
Specifications
| Brand | SK hynix |
|---|---|
| Series | SODIMM Laptop Memory |
| Model | HMA82GS6DJR8N-VK |
| Capacity | 32GB (2 x 16GB) |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
Questions about this item
Does my laptop need a 260-pin DDR4 SO-DIMM slot to use this kit?
Yes, the modules are 260-pin DDR4 SO-DIMMs, the standard form factor for laptops that support DDR4 memory.
If I keep one 16 GB module installed, will the new 16 GB modules run at 2666 MHz CL19?
The kit is rated at 2666 MHz CL19; the system will run all modules at the lowest common speed and timing.
How can I verify the kit is running at 2666 MHz and CL19 after installation?
Check the memory speed and CAS latency in BIOS or with a tool such as CPU-Z; they should show 2666 MHz and CL19.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



