SK hynix
SK hynix HMA451S6AFR8N-TF 4GB DDR4 2133 laptop RAM
4 GB DDR4 laptop module running at 2133 MHz with CL15 timing and 1.20 V operation
- Capacity4GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCNo
- 4 GB capacity adds responsive multitasking headroom
- DDR4 2133 MT/s speed delivers snappy data throughput
- CL15 latency keeps access times tight
- 20 V operation reduces power draw and heat
- 260-pin SO-DIMM fits standard laptop slots
4 GB DDR4 2133 SO-DIMM
This SK hynix module delivers 4 GB of DDR4 memory at 2133 MHz with a CL15 latency. It uses the standard 260-pin SO-DIMM form factor and runs at 1.20 V. The stick is unbuffered and non-ECC, making it a direct drop-in upgrade for compatible laptops.
Ideal for capacity upgrades
The single 4 GB stick suits owners of DDR4 laptops that have a free slot and need more memory for everyday multitasking. Buyers whose machines require ECC or registered memory should look elsewhere, as this module provides neither. Systems limited to a maximum of 4 GB total will not benefit from adding this unit.
260-pin DDR4 SO-DIMM interface
The module fits only laptops that accept 260-pin DDR4 SO-DIMMs operating at 1.20 V. Verify that your device supports DDR4-2133 (PC4-17000) and unbuffered, non-ECC memory before purchasing.
Highlights
- 4 GB capacity adds responsive multitasking headroom
- DDR4 2133 MT/s speed delivers snappy data throughput
- CL15 latency keeps access times tight
- 20 V operation reduces power draw and heat
- 260-pin SO-DIMM fits standard laptop slots
Specifications
| Brand | Hynix |
|---|---|
| Series | SODIMM Laptop Memory |
| Model | HMA451S6AFR8N-TF |
| Capacity | 4GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
Questions about this item
Will the 260-pin SO-DIMM fit my laptop's DDR4 slot?
Yes, the 260-pin DDR4 SO-DIMM form factor matches the standard laptop memory slot for this generation.
What is the correct way to seat the module so it locks in place?
Align the notch with the slot key, insert at an angle, then press down firmly until both side clips click audibly.
Does this 1.20 V unbuffered module need any firmware updates or periodic replacement?
No firmware is required; the module is maintenance-free and only needs replacement if a fault develops or capacity becomes insufficient.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



