Sirlyr RGB PSU Cable Extension Kit 24 Pin ATX Dual 8 Pin PCIe 16AWG
Adds ARGB lighting to a 24-pin ATX and dual 8-pin PCIe power setup using 16AWG PVC-sleeved extensions and a SATA-powered controller
- TypeExtension Cable
- ColorBlack
- Connector A1x ATX 20pin female
- Connector B1x ATX 24pin female
- Terminal GenderMale to Female
- SpecificationsATX, Multicolor, Sirlyr
- Plug-and-play RGB lighting via 5V ARGB header or 3-pin LED port
- Soft PVC sleeving and flexible silicone tubes route easily in tight cases
- 80 LEDs on 24-pin and 81 LEDs on dual 8-pin cables for vivid colour
- 16AWG thick copper cores deliver stable current to GPU and motherboard
- Kit includes 28 cm ATX cable, 34 cm GPU cable, SATA-powered RGB controller and manual
Sirlyr RGB PSU Cable Extension Kit
This kit provides ARGB illuminated extension cables for internal power connections. It includes a 24 pin ATX motherboard cable and dual 8 pin PCIe cables for graphics cards. The 16AWG wire cores deliver stable current flow for custom PC builds. Addressable lighting is controlled via motherboard software or the included SATA powered controller.
Builders adding addressable lighting to power cables
The kit suits enthusiasts who want vibrant ARGB effects on their 24 pin and dual 8 pin connections. It is not for systems lacking a 5V ARGB header or 3 pin LED port for daisy chaining. Buyers needing different connector types or non-illuminated extensions should look elsewhere. The fixed cable lengths may not reach in very large chassis.
Plug and play integration with ARGB ecosystem
Connect the extensions between the power supply and components then link the LED strips to a 5V ARGB header or 3 pin LED port. The flexible PVC sleeving and silicone tubes ease routing in tight spaces. A basic RGB controller powered by SATA is included for systems without motherboard ARGB control. The 28cm ATX and 34cm PCIe cables free up cable management slack.
Highlights
- Plug-and-play RGB lighting via 5V ARGB header or 3-pin LED port
- Soft PVC sleeving and flexible silicone tubes route easily in tight cases
- 80 LEDs on 24-pin and 81 LEDs on dual 8-pin cables for vivid colour
- 16AWG thick copper cores deliver stable current to GPU and motherboard
- Kit includes 28 cm ATX cable, 34 cm GPU cable, SATA-powered RGB controller and manual
Specifications
| Brand | Apple |
|---|---|
| Type | Extension Cable |
| Color | Black |
| Connector A | 1x ATX 20pin female |
| Connector B | 1x ATX 24pin female |
| Terminal Gender | Male to Female |
| Specifications | ATX, Multicolor, Sirlyr |
| Sports Team | 1 Piece |
| Refresh Rate | 2×8 Pin Set |
| Features | ATX, Multicolor, Sirlyr |
| Disclaimer | RoHS |
Questions about this item
What motherboard power connector must I already have to use the 24-pin ATX extension?
Your power supply needs a standard 24-pin ATX male connector; the kit’s 24-pin female end plugs onto it and adds 28 cm of reach plus 80 addressable LEDs
Can I keep my existing graphics card that uses an 8+6 pin power plug?
Yes — the two GPU extensions are 8-pin (6+2) female sockets, so they accept either dual 8-pin or 8+6 pin plugs from your current card and add 34 cm of length with 81 LEDs each
How do I confirm the ARGB lighting is working after I install the kit?
Connect the included SATA-powered controller or daisy-chain the 3-pin 5 V ARGB header to your motherboard, then open your board’s RGB software; the 24-pin cable should show 80 LEDs and each GPU cable 81 LEDs cycling through the selected mode
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115729BTC
In stock
