We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of 60cm flexible RGB LED strips with 36 SMD 5050 chips, multicolour finish, adhesive backing

SIMPLEX TECHNOLOGY CO., LIMITED

SIMPLEX TECHNOLOGY CO., LIMITED 60cm 36-SMD 5050 RGB Flexible LED DRL Turn Signal Pair for Ford Mustang

SKU CH-PQAH-YBXQW

A pair of 60cm flexible 5050 SMD RGB LED strips with 36 diodes each, IP68 waterproof, app-controlled colour chasing and cuttable every 12 LEDs for Ford Mustang DRL and turn-signal use

  • TypeAccent/Auxiliary Lighting
  • Color/FinishMulti-Color
  • Lens Colormuticolor
  • LocationDriver and Passenger Side
  • QualityPerformance
  • APP control changes colours and patterns
  • IP68 waterproof rating handles heavy rain
  • Cuttable every three LEDs for custom length
  • 36 high-brightness 5050 SMD LEDs per strip
  • Easy gap-fit install without removing headlights

Pair of 60cm RGB LED Strips

This kit contains two flexible 60cm strips each fitted with 36 5050 SMD LEDs. They mount in the gap between the headlight and the hood on a Ford Mustang without removing the headlight assembly. The self-adhesive backing secures the strips directly to a clean, dry surface. Operation requires a 12V DC supply with red, black and yellow wiring for power, ground and turn-signal function.

Sustained output with IP68 sealing

The IP68 rating protects the LEDs and circuitry during prolonged exposure to heavy rain and road spray. Heat dissipation is handled by the flexible soft tube so brightness remains stable during extended use as daytime running lights or sequential turn signals. The strips can be trimmed every three LEDs from the end to fit custom lengths without affecting the remaining segments. Low power draw reduces thermal load on the vehicle electrical system.

12V DC automotive electrical interface

The three-wire connection ties into standard 12V vehicle circuits for power, ground and turn-signal triggering. Voltage must stay within the 12V DC nominal range; higher or lower system voltages are not supported. The strips draw minimal current so they do not overload factory wiring or require additional relays. Compatibility is limited to vehicles with a 12V negative-ground electrical architecture.

Highlights

  • APP control changes colours and patterns
  • IP68 waterproof rating handles heavy rain
  • Cuttable every three LEDs for custom length
  • 36 high-brightness 5050 SMD LEDs per strip
  • Easy gap-fit install without removing headlights

Specifications

TypeAccent/Auxiliary Lighting
Color/FinishMulti-Color
Lens Colormuticolor
LocationDriver and Passenger Side
QualityPerformance

Questions about this item

How much power do the 5050 SMD strips draw when running all day on a 12 V system?

Each 60 cm strip uses 36 SMD 5050 LEDs at DC 12 V, giving low power consumption and minimal heat during extended operation.

What existing vehicle wiring must be present for the three-wire connection to work?

You need a 12 V positive feed, a ground point, and a turn-signal circuit to attach the red, black and yellow wires respectively.

Will the IP68-rated flexible strips survive alongside original headlight seals on a Mustang?

The soft tube bends into the headlight-to-hood gap without disturbing factory seals, and the IP68 rating handles rain and wash cycles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.