We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three green DDR2 DIMM modules with gold contacts

Simmtec, Inc

Simmtec, Inc 6GB (3 x 2GB) DDR2 DIMM 240 PIN 667Mhz PC2 5400 / PC2 5300 FOR DFI LANPARTY LP JR 790GX-M2RS

SKU CH-HQGP-90QRG

6GB DDR2 kit with three 2GB DIMMs running at 667MHz PC2-5400/5300 for DFI LANPARTY LP JR 790GX-M2RS motherboards

  • Capacity6GB (3 x 2GB)
  • 6 GB total capacity from three 2 GB modules
  • DDR2 667 MHz speed rated at PC2 5400 and PC2 5300
  • 240-pin DIMM form factor fits DFI LANPARTY LP JR 790GX-M2RS
  • 100 % compatible memory kit for DFI LANPARTY LP JR 790GX-M2RS

6 GB DDR2 kit for DFI LANPARTY LP JR 790GX-M2RS

This 6 GB kit contains three 2 GB DDR2 DIMMs built to run at 667 MHz with PC2-5400 and PC2-5300 ratings. The 240-pin modules are validated for full compatibility with the DFI LANPARTY LP JR 790GX-M2RS motherboard. It suits owners of that board who need the maximum supported memory in a matched set.

Sustained load behaviour on legacy DDR2 platform

Under continuous use the modules operate at the rated 667 MHz without exceeding the standard DDR2 voltage envelope. The three-stick population fills every slot on the target board, so memory density is fixed at 6 GB. Builders who want more capacity or a faster memory standard cannot use this kit.

Highlights

  • 6 GB total capacity from three 2 GB modules
  • DDR2 667 MHz speed rated at PC2 5400 and PC2 5300
  • 240-pin DIMM form factor fits DFI LANPARTY LP JR 790GX-M2RS
  • 100 % compatible memory kit for DFI LANPARTY LP JR 790GX-M2RS

Specifications

Capacity6GB (3 x 2GB)

Questions about this item

How much power does this DDR2 kit draw when the system runs all day?

DDR2 DIMMs at 667 MHz typically draw a few watts per module, so the three 2 GB sticks together add only a small load to the motherboard power budget.

What motherboard slot must my board provide for these three 240-pin modules to work?

The kit requires three DDR2 DIMM sockets; the DFI LANPARTY LP JR 790GX-M2RS has four, so all three sticks will fit.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.