Simmtec, Inc
Simmtec, Inc 4GB DDR3L PC3L-12800 1600MHz 1.35V 240-pin DIMM memory upgrade
A 4GB DDR3L module rated at 1600MHz and 1.35V for Biostar G41D3B systems
- 4GB capacity expands Biostar G41D3B memory
- DDR3L 1.35V operation reduces power draw
- 1600MHz PC3L-12800 speed supports responsive multitasking
- 240-pin DIMM fits standard desktop slots
- Non-ECC 2Rx8 design ensures broad compatibility
4GB DDR3L module for Biostar G41D3B
This 4GB DDR3L DIMM is built for the Biostar G41D3B desktop and workstation motherboard. It delivers a straightforward memory upgrade for systems using that board. The single stick fits the platform's 240-pin slots directly.
DDR3L voltage and speed envelope
DDR3L parts run at 1.35 V instead of the 1.5 V used by standard DDR3, so the motherboard must support the lower voltage. The PC3L-12800 rating sets the data rate at 1600 MHz, and the board cannot exceed that speed with this module. Non-ECC operation is required; ECC buffers will not work.
2Rx8 organisation decides fit
The module uses a 2Rx8 chip arrangement, which determines how the memory controller addresses the 4 GB capacity. If the Biostar G41D3B needs a different rank or width configuration, this stick will not be recognised. Check the board manual for the supported organisation before buying.
Highlights
- 4GB capacity expands Biostar G41D3B memory
- DDR3L 1.35V operation reduces power draw
- 1600MHz PC3L-12800 speed supports responsive multitasking
- 240-pin DIMM fits standard desktop slots
- Non-ECC 2Rx8 design ensures broad compatibility
Specifications
No published specifications for this item yet.
Questions about this item
Is the 4 GB DDR3L PC3L-12800 module the only capacity offered for this Biostar G41D3B upgrade?
The listing shows a single 4 GB DDR3L PC3L-12800 stick; no other capacities are mentioned for this part number.
What does the 1600 MHz rating mean when the module is installed in the Biostar G41D3B?
The module runs at 1600 MHz DDR3L speed, delivering PC3L-12800 bandwidth at 1.35 V once seated in the board.
Does the 240-pin DDR3L DIMM fit the standard desktop slot on the G41D3B?
Yes, the 240-pin DIMM matches the desktop DDR3L slot used by the Biostar G41D3B motherboard.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



