We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular HDMI extender transmitter and four small receivers with Ethernet ports

SIIG, Inc

SIIG, Inc CEH26V11S1 power splitter cord 1x4 1080p HDMI over IP 120m

SKU CH-2Y5A-XHRJ1 MPN CEH26V11S1

Extends 1080p HDMI to four displays up to 120 m over Cat6 with IR control and cascade support for 30 receivers

  • Extends 1080p HDMI up to 120m over Cat6
  • Splits one source to four displays simultaneously
  • Cascades up to 30 receivers per transmitter
  • Supports VLAN for many-to-many matrix switching
  • Auto-adjusts signal for optimal video and audio

1x4 HDMI over IP extender kit

The SIIG CEH26V11S1 distributes a 1080p HDMI source to four displays over Cat6 cable up to 120 metres. It is aimed at installers who need multi-room video without running long HDMI leads.

Cat6 distance and switch requirements

A single Cat6 run carries the signal up to 394 feet; longer runs are not supported. The 1-to-many topology needs a dedicated unmanaged Gigabit switch or a smart switch with VLAN isolation, and each VLAN can host only one transmitter.

Source resolution and receiver count

Verify the source outputs 1080p at 60 Hz or one of the listed lower formats such as 720p at 50 or 60 Hz. Plan for one receiver per display; additional receivers are sold separately and the system caps at 30 receivers per transmitter.

Highlights

  • Extends 1080p HDMI up to 120m over Cat6
  • Splits one source to four displays simultaneously
  • Cascades up to 30 receivers per transmitter
  • Supports VLAN for many-to-many matrix switching
  • Auto-adjusts signal for optimal video and audio

Specifications

No published specifications for this item yet.

Questions about this item

Should I pick the single 1x4 kit or add extra CE-H26U11-S1 receivers for more than four displays?

The kit includes one transmitter and four receivers for four displays; each additional CE-H26U11-S1 receiver adds one more display, and up to 30 receivers can cascade from one transmitter.

What does the 120 m figure mean when the extender is connected in my rack?

It means a 1080p HDMI signal travels up to 120 metres (394 ft) over a single Cat6 cable from transmitter to each receiver with automatic cable-length adjustment.

How does the Gigabit Ethernet interface limit the number of receivers I can chain?

A dedicated Gigabit switch supports up to 30 receivers per transmitter; VLAN-segregated smart switches allow many-to-many layouts but only one transmitter per VLAN.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.