We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact metal media converter with copper and ST fiber ports

SIGNAMAX

SIGNAMAX 065-1100 10/100BaseT/TX to 100BaseFX ST Multimode Media Converter

SKU CH-19QZ-6KM2S

Converts 10/100Base-TX copper to 100Base-FX multimode fibre via ST connector and supports wall or chassis mounting

  • Specificationsignamax
  • Converts copper 10/100BaseT/TX to 100BaseFX fiber
  • ST multimode connector extends network reach over fiber
  • Wall or chassis mounting fits diverse installation needs
  • Single-port design simplifies point-to-point media conversion
  • Lightweight 1.7 lb unit eases handling and deployment

10/100 Copper-to-Fibre Media Converter

The SIGNAMAX 065-1100 converts 10/100BaseT/TX copper signals to 100BaseFX multimode fibre using an ST connector. It is designed for installers and network managers who need to extend Ethernet links beyond the standard copper distance limit. The unit supports wall or chassis mounting for flexible deployment in structured wiring environments. It provides a single port for point-to-point media conversion.

Distance and Speed Constraints

The converter operates at 100 Mbps over multimode fibre, so it cannot carry Gigabit or higher traffic. Multimode fibre reach is limited by the 100BaseFX standard, typically restricting links to around two kilometres. The copper side auto-negotiates 10 or 100 Mbps but offers no PoE capability. Users requiring longer distances or higher bandwidth must select different hardware.

Installation Notes

The compact enclosure measures 4.85 by 3.25 by 1 inches and weighs 1.7 pounds, allowing easy wall mounting with basic hardware. A common issue is mismatching the ST connector polish type or using single-mode fibre, which will not work with this multimode unit. Ensure the copper cable does not exceed 100 metres before the converter. No software configuration is required.

Highlights

  • Converts copper 10/100BaseT/TX to 100BaseFX fiber
  • ST multimode connector extends network reach over fiber
  • Wall or chassis mounting fits diverse installation needs
  • Single-port design simplifies point-to-point media conversion
  • Lightweight 1.7 lb unit eases handling and deployment

Specifications

Brandsignamax
Model065-1100
Part Number065-1100
Specificationsignamax

Questions about this item

How do I decide which mounting option fits my setup?

The unit can be fixed to a wall or slotted into a chassis, so choose the method that matches your available space and existing rack or enclosure.

What throughput will I actually see on the copper port once the converter is installed?

The copper port operates at 10 or 100 Mbps, so real-world traffic will not exceed 100 Mbps in either direction.

Which fibre connector standard does the ST interface use and what distance limit applies?

The ST connector is fitted for multimode fibre, which typically supports campus runs up to 2 kilometres at 100 Mbps.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.