We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 5-port PWM fan hub with 35 cm cables and adhesive backing

Sign 1007 5-port 35 cm 4-pin PWM fan hub

SKU CH-T2QS-YSCCB MPN 1007

A 35 cm PWM fan hub expands one motherboard 4-pin header into five ports for 3-pin or 4-pin fans

  • Type SpecificationsDesktop
  • Powers five fans from one CPU header using 35 cm cables
  • Supports both 3-pin and 4-pin PWM fans on every port
  • Tinned copper conductors maintain full fan speed without signal loss
  • 9 mm adhesive backing secures hub inside any chassis
  • 1007 22 AWG PVC-insulated wire rated to 80 °C for safe operation

Compact 5-port PWM fan hub

The Sign 1007 hub expands a single 4-pin motherboard header into five fan connections. It accepts both 3-pin and 4-pin plugs, making it useful for builders who need more headers than the board provides.

Simple install with adhesive backing

A 35 cm lead reaches the CPU fan header while the 2.9 mm thick adhesive pad secures the hub inside the chassis. The first port passes the tachometer signal back to the board; the remaining four run PWM control without extra configuration.

Limited by single-header power budget

All five fans draw current from one 4-pin header, so total load must stay within the motherboard's rated output. The hub adds no external power input and cannot drive fans that exceed that shared limit.

Highlights

  • Powers five fans from one CPU header using 35 cm cables
  • Supports both 3-pin and 4-pin PWM fans on every port
  • Tinned copper conductors maintain full fan speed without signal loss
  • 9 mm adhesive backing secures hub inside any chassis
  • 1007 22 AWG PVC-insulated wire rated to 80 °C for safe operation

Specifications

BrandUniversal
Type SpecificationsDesktop

Questions about this item

How do I confirm the 1007 hub is controlling fan speed correctly after connecting it to the motherboard 4-pin header?

The first port on the hub connects to the CPU fan header so the motherboard reads its RPM; the other four ports then follow that PWM signal.

What comes in the box and what must I source separately for the 1007 5-port hub?

The hub with 35 cm 22 AWG leads and a 2.9 mm adhesive pad is included; fans and any extra mounting tape are not.

Should I choose the 35 cm wire length or a custom length for the 1007 hub?

The standard 35 cm reach suits most mid-tower builds; select a custom length only if your cable routing demands more or less.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.