We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two rectangular sealed lead-acid batteries, grey cases with FP terminals, 7.72 by 5.16 by 6.1 inches

Sigma Power Systems

Sigma Power Systems 12V 35Ah SLA Battery FP Terminal 2 Pack

SKU CH-GDRM-30WJZ

Two sealed lead-acid 12 V 35 Ah batteries with FP terminals, each 7.72 × 5.16 × 6.1 in and 23 lbs, supplied as a direct replacement pair for Pride Mobility Rally wheelchair scooters

  • Battery TypeSealed Lead Acid
  • 12 V 35 Ah sealed lead-acid power for Pride Mobility Rally scooters
  • FP terminal design matches original equipment for direct installation
  • Compact 7.72 x 5.16 x 6.1 in case fits existing battery compartment
  • Two-pack supply ensures both batteries replaced simultaneously for balanced performance
  • Each unit weighs 23 lbs indicating robust plate construction for deep-cycle use

Purpose and fit

This two-pack supplies 12-volt, 35-ampere-hour sealed lead-acid batteries with FP terminals. They are built as direct replacements for the Pride Mobility Rally wheelchair scooter. Users must reuse their existing cables and hardware.

Capacity and limits

Each unit stores 35 Ah at 12 V, giving enough energy for typical daily mobility use. Runtime falls as the load increases or the battery ages; deep discharge will shorten overall service life.

Build and connections

The FP terminals match the original scooter layout so the original wiring bolts on without adapters. Each battery weighs 23 lbs and measures 7.72 x 5.16 x 6.1 inches, fitting the factory battery tray. The sealed case prevents acid leaks in normal operation.

Highlights

  • 12 V 35 Ah sealed lead-acid power for Pride Mobility Rally scooters
  • FP terminal design matches original equipment for direct installation
  • Compact 7.72 x 5.16 x 6.1 in case fits existing battery compartment
  • Two-pack supply ensures both batteries replaced simultaneously for balanced performance
  • Each unit weighs 23 lbs indicating robust plate construction for deep-cycle use

Specifications

Battery TypeSealed Lead Acid

Questions about this item

Will the FP terminals on these 12 V 35 Ah batteries connect directly to the existing wiring on my Pride Mobility Rally scooter?

Yes, the FP terminals match the original specification so you can reuse your current cables and connectors without modification.

How can I confirm each 12 V 35 Ah unit is performing correctly after installation?

Measure the open-circuit voltage with a multimeter; a fully charged battery should read close to 12 V, and the scooter should achieve its normal range on a full charge.

The pack ships as two 12 V 35 Ah batteries — are cables or mounting brackets included, or must I supply them?

Only the two batteries are supplied; you must reuse your existing cables, connectors and mounting hardware.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.