SIEMENS
SIEMENS RJ45 90 Degree Connector 24AWG 4 Contact
A 90-degree RJ45 connector for Cat5e Ethernet cables with four contacts on 24 AWG solid wire
- Color MappingBlack
- TypeRJ45/90 Degree
- 90° angle saves space in tight panels
- Cat5e rated for reliable Ethernet links
- 4 contacts on 8-position RJ45 footprint
- 24 AWG solid wire suits Fast Connect cables
- RoHS and UL listed for compliance
90 Degree RJ45 Connector
This 90 degree RJ45 connector is designed for Ethernet cabling in tight spaces. It accepts solid wire and uses a Fast Connect termination method. The connector is Category 5e rated and finished in black. It meets RoHS and UL standards.
Installers needing a right-angle Ethernet
Suited for panel-mount or wall-plate installations where a straight connector would not fit. The four-contact layout supports two-pair Ethernet links. Builders requiring eight-contact gigabit terminations should look at a different connector. Users working with stranded patch cable need a connector rated for that wire type.
Four-contact Category 5e pinout
Only four of the eight positions are loaded with contacts, so the connector carries two-pair Ethernet signals. This pinout determines whether the part matches the required link speed and wiring scheme. Verify the application calls for a four-contact Category 5e connector before purchasing.
Highlights
- 90° angle saves space in tight panels
- Cat5e rated for reliable Ethernet links
- 4 contacts on 8-position RJ45 footprint
- 24 AWG solid wire suits Fast Connect cables
- RoHS and UL listed for compliance
Specifications
| Brand | Siemens |
|---|---|
| Color Mapping | Black |
| Type | RJ45/90 Degree |
Questions about this item
What Ethernet speed does the Cat 5e RJ45 90 degree connector support in practice?
The Cat 5e rating supports Gigabit Ethernet up to 1 Gbps over standard twisted-pair cabling.
What cable diameter and wire type does the 90 degree RJ45 housing accept?
It accepts solid 24 AWG conductors with Fast Connect insulation displacement, no stripping required.
How do you terminate the 4-contact RJ45 plug, and which step is often missed?
Insert each solid wire into the colour-coded IDC slots, fully seat them with a punch-down tool, then snap the hinged cover — skipping the full seat causes open circuits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Wilson Antennas 305-480 2 ft Silver Load FGT Fiberglass Whip Black antenna
Galtronics 02130269-04935U Indoor Omni Antenna 617-6000MHz 4.3-10 Female
- Antenna
Galtronics 02121269-04935U broadband ceiling mount omni antenna 698-6000MHz
- Antenna mount



