SIEMENS
SIEMENS B380 BL Series Miniature Circuit Breaker 80A 3 Pole 240V AC 10kA
Three-pole miniature circuit breaker rated 80 A at 240 V AC with a 10 kA interrupting capacity for Siemens P1 panelboards
- 80 A rating protects three-phase circuits up to 240 V AC
- 10 kA interrupting capacity clears faults safely at rated voltage
- Bolt-on mounting fits directly into Siemens P1 panelboards
- Terminal lugs accept aluminium wire from 2 AWG to 1/0 AWG
- 125 A frame size in standard BL series form factor
SIEMENS B380 80A Three-Pole Breaker
The SIEMENS B380 is a bolt-on miniature circuit breaker from the BL series rated at 80 amps and 240 volts AC. It provides standard overcurrent protection for three-phase circuits and installs directly into compatible Siemens P1 panelboards with a 10kA interrupting rating at 240V AC.
Suits P1 panelboard retrofits
Electricians wiring Siemens P1 load centers for three-phase distribution will find this breaker matches the bus and mounting style. It is not rated for DC applications and the bolt-on design prevents use in plug-on or other manufacturer panelboards.
80A continuous capacity
The breaker handles 80 amp loads on copper conductors from 4 AWG up to 1/0 AWG or aluminum from 2 AWG up to 1/0 AWG. Its 125A frame size sets the physical limit, so circuits requiring higher ampacity need a larger frame device.
Highlights
- 80 A rating protects three-phase circuits up to 240 V AC
- 10 kA interrupting capacity clears faults safely at rated voltage
- Bolt-on mounting fits directly into Siemens P1 panelboards
- Terminal lugs accept aluminium wire from 2 AWG to 1/0 AWG
- 125 A frame size in standard BL series form factor
Specifications
| Brand | SIEMENS |
|---|
Questions about this item
What panelboard series must I already have to mount this BL-series breaker?
It is designed for Siemens P1 panelboards and load-center series P1, bolt-on mounting only.
Can I use 4 AWG copper wire with the 80 A breaker?
Yes, the lug accepts copper from 4 AWG up to 1/0 AWG and aluminium from 2 AWG up to 1/0 AWG.
How do I confirm the breaker trips at the rated 10 kA interrupting capacity?
The toggle will move to the centre trip position during an over-current event; only a calibrated high-current test set can verify the 10 kA rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
