We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

SIEMENS

SIEMENS 3RH29111DA11 auxiliary contact block 1NO/1NC 690 V AC

SKU CH-XVA6-6Y6QT

Adds two side-mounted auxiliary contacts — one normally open and one normally closed — rated for 690 V AC on SIRIUS 3RT2 S00 contactors

  • 1 NO + 1 NC contacts for versatile control circuits
  • 690 V AC rating handles demanding industrial voltage
  • Side-mount design fits SIRIUS 3RT2 S00 contactors directly
  • Screw terminals give secure, tool-friendly wiring
  • IP20 protection shields live parts from finger contact

Purpose and fit

The Siemens 3RH29111DA11 auxiliary contact block adds one normally open and one normally closed contact to SIRIUS 3RT2 contactors in frame size S00. It suits control-panel builders who need side-mounted signalling or interlocking on a NEMA size 0 starter.

Contact configuration

The block provides exactly two contacts rated at 690 V AC, with screw terminals for wiring. It mounts on the side of compatible contactors and carries an IP20 rating for finger-safe terminals.

Thermal and electrical behaviour

In normal operation the contacts switch low-energy control circuits with minimal heat rise and no audible noise. Power draw is limited to the coil circuit of the host contactor, and the IP20 housing protects against accidental contact.

Highlights

  • 1 NO + 1 NC contacts for versatile control circuits
  • 690 V AC rating handles demanding industrial voltage
  • Side-mount design fits SIRIUS 3RT2 S00 contactors directly
  • Screw terminals give secure, tool-friendly wiring
  • IP20 protection shields live parts from finger contact

Specifications

BrandSIEMENS

Questions about this item

What does the 690 V AC rating mean when the block is installed in a starter?

It sets the highest voltage the auxiliary contacts can switch safely; the block is tested for 690 V AC operation.

How does the screw-terminal interface limit the wiring I can use?

Screw terminals accept solid or stranded conductors tightened by hand or tool; they do not support spring-cage or push-in wiring.

What does the side-mount design require on the contactor?

The block clips onto the side of a SIRIUS 3RT2 contactor frame size S00, NEMA size 0, adding 1 NO and 1 NC contact.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.