We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two compact rectangular PoE splitters with Ethernet ports and 5.5x2.1mm DC plugs, matte black finish

SICSOLINK Gigabit PoE Splitter 12V 2A 5.5x2.1mm 2 Pack

SKU CH-KNZE-HGFGD

Splits PoE into gigabit Ethernet and 12 V 2 A DC power for non-PoE devices, two units included

  • Interfaceethernet
  • Powerline Speeds1 gigabits_per_second
  • Connection TypeGigabit Ethernet
  • Connection Speeds1 gigabits_per_second
  • Kit Type12V 2A DC Plug 5.5x2.1mm DC
  • Features2 POE splitter in one box
  • Delivers power and data over a single PoE cable to non-PoE devices
  • Gigabit Ethernet port supports 1000 Mbps throughput for low-latency connections
  • IEEE 802.3af/at compliant with 12 V 2 A output on 5.5×2.1 mm DC plug
  • Built-in overcurrent, short-circuit, overvoltage and overpower protection for safe operation
  • Two splitters included in one package for multi-device deployments

Gigabit PoE Splitter 12V 2A

This SICSOLINK Gigabit PoE Splitter separates power and data from a single PoE cable, delivering 12V DC at 2A through a 5.5x2.1mm barrel connector to non-PoE devices. The two-pack kit supports IEEE 802.3af/at standards and provides 1000Mbps Ethernet throughput for compatible IP cameras and access points.

Installers powering non-PoE gear

Ideal for technicians adding IP cameras, wireless access points, or other 12V DC equipment where only a PoE switch port is available. Not suitable for devices requiring voltages other than 12V, barrel plugs other than 5.5x2.1mm, or power budgets above 24W.

Verify switch output and cabling

Confirm your PoE switch delivers 44V to 57V DC per port and complies with IEEE 802.3af or 802.3at before connecting. Ensure the Ethernet cable run stays within 100 metres and that the target device accepts 12V 2A via a 5.5x2.1mm centre-positive jack.

Highlights

  • Delivers power and data over a single PoE cable to non-PoE devices
  • Gigabit Ethernet port supports 1000 Mbps throughput for low-latency connections
  • IEEE 802.3af/at compliant with 12 V 2 A output on 5.5×2.1 mm DC plug
  • Built-in overcurrent, short-circuit, overvoltage and overpower protection for safe operation
  • Two splitters included in one package for multi-device deployments

Specifications

BrandSICSOLINK
Interfaceethernet
Powerline Speeds1 gigabits_per_second
Connection TypeGigabit Ethernet
Connection Speeds1 gigabits_per_second
Kit Type12V 2A DC Plug 5.5x2.1mm DC
Features2 POE splitter in one box
Dimensions2.0 in x 1.0 in x 4.0 in
Weight0.108 kilograms
Package Contents2 POE splitter in one box

Questions about this item

Do I need a PoE switch that delivers 44-57 V to power the splitter?

Yes, the splitter accepts DC 44-57 V from a standard PoE switch compliant with IEEE 802.3af/at.

Will the gigabit Ethernet port slow down if I connect it to a 100 Mbps switch?

The port auto-negotiates to 100 Mbps when linked to slower equipment, so it works but caps at that speed.

How can I confirm the 12 V 2 A output is live after connecting the 5.5 × 2.1 mm plug?

The target device powers on and the Ethernet link LEDs show activity, indicating both power and data are passing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.